Zanussi ZER 140 W manual Maintenance and Cleaning, Internal cleaning, External cleaning

Models: ZER 140 W

1 16
Download 16 pages 59.15 Kb
Page 6
Image 6
Maintenance and Cleaning

Maintenance and Cleaning

Warning

Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the ELECTRICITY supply.

Internal cleaning

Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and dry thoroughly.

NEVER USE DETERGENTS, ABRASIVE POWDERS, HIGHLY PERFUMED CLEANING PRODUCTS OR WAX POLISHES, TO CLEAN THE INTERIOR AS THESE WILL DAMAGE THE SURFACE AND LEAVE A STRONG SMELL.

Clean the drain hole of the water trough at regular intervals and make sure that the drain hole is never obstructed, so that the defrost water may flow freely.

Important

Do not use abrasive products.

External cleaning

Wash the outer cabinet with warm soapy water. Do NOT use abrasive products.

Once or twice a year dust the condenser (black grill) and the compressor at the back of the appliance, with a brush or vacuum cleaner, see the figure.

You MUST ensure that the appliance is switched OFF. An accumulation of dust will affect the performance of the appliance and cause excessive electricity consumption.

CONDENSER

COMPRESSOR

D358

Changing the light bulb

Should the interior light fail to work, first switch off the appliance and disconnect from the electricity supply. Replace the bulb as follows:

1.Unscrew the light cover. Unscrew the bulb and replace it with a new 15 watt bulb (available from your nearest Service Force centre).

2.Replace the light cover into its original position and replacing the screw.

D731

When the appliance is not in use

When the appliance is not in use for long periods, disconnect from the electricity supply, empty all foods and clean the appliance, leaving the door ajar to prevent unpleasant smells.

6

Page 6
Image 6
Zanussi ZER 140 W manual Maintenance and Cleaning, Internal cleaning, External cleaning, Changing the light bulb