INSTALLATION

Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.

Important

IF YOU ARE DISCARDING AN OLD APPLIANCE THAT HAS A LOCK OR CATCH ON THE DOOR, YOU MUST ENSURE THAT IT IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE.

Positioning

This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rating plate, which is located at the left on the inside of the appliance.

The following table shows which ambient temperature is correct for each climate classification:

SN +10°C to + 32°C

N+16°C to + 32°C

ST +18°C to + 38°C

T+18°C to + 43°C

It should be located in a dry atmosphere, out of direct sunlight and away from extreme temperature e.g. not next to a boiler or radiator, or in a very cold room e.g. an outhouse, where the temperatures may fall below 10°C (50°F). If these temperatures are exceeded i.e. colder or warmer, then the appliance may not operate correctly.

You should also ensure that air can circulate freely around the back and the top of the cabinet. There must also be at least 100 mm (4”) distance between the top of the cabinet and any overhanging kitchen furniture

(A). Ideally, the appliance should not be positioned beneath overhanging furniture (B).

There should also be a gap of 25 mm either side of the appliance. Do not obstruct the space underneath. The back of the cabinet may be placed close to the wall but must not touch it. DO NOT install in places with restricted ventilation.

Adjust the level of the appliance by screwing out the adjustable foot, or feet, at the bottom of the cabinet using your fingers or a tool (see figure).

Rear spacers

The plastic bag containing all relevant documentation also contains two spacers to be fitted into special holes in the back of the appliance.

Fit the spacers into the holes, taking care to ensure that the arrow (A) is positioned as shown in the diagram. Then turn them through 45° (arrow (A) vertical) until they lock into place.

Important

It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

Depending upon the position which you choose for your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions on “Door reversal”.

100 mm

 

A

B

10 mm

10 mm

NP002

 

D200

 

A

45°

PR60

14

Page 13 Page 15
Page 14
Image 14
Zanussi ZERB 2520 SI manual Installation, Positioning, Rear spacers
Page 13 Page 15

ZERB 2520 SI, ZERB 2520 specifications

The Zanussi ZERB 2520 SI and ZERB 2520 refrigeration models stand out for their exceptional performance, modern design, and innovative technologies, making them a preferred choice for households seeking reliable cooling solutions. These built-in refrigerator models integrate seamlessly into kitchen spaces, offering aesthetic appeal alongside functionality.

One of the main features of the Zanussi ZERB 2520 models is their generous storage capacity. With a well-organized interior that includes adjustable shelves and dedicated compartments, users can easily store a variety of food items, from large items to smaller snacks. The fridge's design facilitates optimal space utilization, enabling easy access to stored items while maintaining a tidy appearance.

Energy efficiency is a hallmark of the Zanussi ZERB 2520 SI and ZERB 2520 models. Both units come equipped with energy-saving technologies that help reduce electricity consumption without compromising on cooling performance. This not only contributes to lower utility bills but also aligns with environmentally friendly practices, making these fridges an excellent choice for eco-conscious consumers.

The SmartFrost technology is another significant feature of the Zanussi ZERB 2520 range. This advanced frost-free system minimizes frost buildup, reducing the need for manual defrosting and ensuring that the fridge maintains optimal conditions for food preservation. The result is a hassle-free experience that keeps the unit clean and efficient.

Additionally, the Zanussi ZERB 2520 SI and ZERB 2520 models feature a user-friendly control panel, allowing for effortless temperature regulation and other adjustments. The adjustable temperature settings cater to different food preservation needs, ensuring that all items—from fruits and vegetables to dairy products—remain fresh for longer durations.

Durability and build quality are also standout characteristics of these units. Constructed with high-quality materials, the Zanussi ZERB 2520 models are designed to withstand the rigors of daily use while maintaining their stylish appearance. Their whisper-quiet operation ensures that the fridge does not disrupt the peaceful ambiance of the home.

In summary, the Zanussi ZERB 2520 SI and ZERB 2520 refrigeration models offer a wonderful blend of spacious storage, energy efficiency, innovative cooling technologies, and durable construction. Whether for a busy family or a culinary enthusiast, these refrigerators deliver performance and reliability, making them an excellent investment for any modern kitchen.
Top Page Image Contents