Zanussi ZFC 67/14 manual Door reversibility

Door reversibility

Before carrying out any work on the appliance, unplug it from the power socket.

Remove the upper hinge (Fig. 5) and slide the top door off the middle hinge.

Remove the middle hinge, turn it through 180° and refit it on the opposite side (Fig. 6) after having removed the plugs (F-Fig. 7) which mask the holes. The plugs must be refitted in the holes left open on the opposite side.

Refit the top door and the top hinge. Unscrew the left-hand levelling foot, which will be refitted on the opposite side. Unscrew the right-hand levelling foot (H), the corresponding hinge (I) and the stop (L) and refit all these on the left-hand side (Fig. 8).

Reverse the handles after having removed the clip- in screw covers (Fig. 9). The unused holes are masked with plastic plugs which should be removed and refitted in the holes left open.

Attention

After completion of the door reversibility operation, check that the door gasket adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier.

Fig. 5

D185

Fig. 6

E

D045

Fig. 7

F

D047

Fig. 8

L

I

H

D537

Fig. 9

D336

6