Door reversal directions (Fig. 4)
Before carrying out the operations described below, pull out the mains plug from the wall socket.
To carry out this reversal go through the following steps:
Gently lay the fridge on its back with the top held away from the floor by
Remove bottom hinge (3), pin (1), insert (4) and screw (2);
Slide the door out from pin (5), unscrew the pin and refit it on the opposite side;
Unscrew the foot on the left hand side and refit it on the opposite side;
Remove the two screws which mask the holes for fixing the hinge from the left hand side;
Refit the door and the lower hinge (turning it 180°), the insert (4), the pin (1) and the screw (2) as shown in Fig. 4;
Remove the handle (6) and refit it on the opposite side.
Attention
After completion of the door reversibility operation, verify that the door gasket is adherent to the cabinet.
If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier.
Fig. 4
5
6
4 
3
1
2
D193/B
7
