Zanussi ZGA 75 B manual Servicing, Customer Care, There is no spark when lighting the gas

SERVICING

If you require service or spare parts, contact your local Zanussi Service Force Centre. Please, carry out the following checks before contacting your local Zanussi Service Force Centre.

There is no spark when lighting the gas:

•Check that the unit is plugged in and the electrical supply is switched on

•Check that the RCCB has not tripped (if fitted)

•Check the mains fuse has not blown

The gas ring burns unevenly:

•Check the burner cover has been replaced correctly, e. g. after cleaning

•Check the main nozzle is not blocked and the burner ring is clear of food particles

If after carrying out the above checks your appliance is still faulty, contact your local Zanussi Service Force Centre, whose address and telephone number can be found in the accompanying Customer Care Booklet, and also in your local telephone directory under 'Z'. Please, ensure you give the model and serial number of the appliance.

In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. Please, note that proof of purchase is required for any in-guarantee service call.

Customer Care

If you have a general enquiry concerning your Zanussi appliance or for information on our full appliance range, please contact our customer care department by letter or telephone as follows:

Customer Care Department

Zanussi Limited

Zanussi House

Hambridge Road

Newbury

Berkshire

RG14 5EP

Tel: 01635-521313

8