Cast Iron Pan Supports
The hob has cast iron pan supports.
Take care when removing them. They are very heavy and could damage the hob or your kitchen furniture if you let them fall down.
To keep the pan supports in the correct position, they are hooked into hinges at the back of the hob. When removing the pan supports, lift them up as shown in the diagram. Never turn the pan supports on the hinges, this could damage them.
Wash the pan supports using hot soapy water. If necessary, a paste cleaner or a soap impregnated steel wool pad can be used with caution.
After cleaning, be sure to wipe dry with a soft cloth.
Ignition electrode
The electric ignition is obtained through a ceramic "electrode" and a metal electrode (Fig. 1 - letter C). Keep these components very clean, to avoid lighting difficulties, and check that the burner crown holes are not obstructed.
YES |
NO |
Something Not Working?
If the hob is not working correctly, please carry out the following checks before contacting your local Zanussi Service Force Centre.
SYMPTOM | SOLUTION | |
There is no spark when lighting the gas | Check that the unit is plugged in and the electrical | |
| supply is switched on | |
| Check that the RCCB has not tripped (if fitted) | |
| Check the mains fuse has not blown | |
| Check the burner cap and crown have been | |
| replaced correctly, e.g. after cleaning. | |
|
| |
The gas ring burns unevenly | Check the main jet is not blocked and the burner | |
crown is clear of food particles. | ||
| ||
| Check the burner cap and crown have been | |
| replaced correctly, e.g. after cleaning. | |
|
|
If after all these checks, your hob still does not operate correctly, contact your local Zanussi Service Force Centre.
Please note that it will be necessary to provide proof of purchase for any
6
