Product description
Cooking surface layout
1 | 2 |
| |
| 3 |
5 | 4 |
|
1
2
3Control knobs
4Auxiliary burner
5Rapid burner
Control knobs
Symbol
Operation
Description
no gas supply / off position
Symbol | Description |
| ignition position / maximum gas |
| supply |
| minimum gas supply |
Ignition of the burner
Warning! Be very careful when you use open fire in kitchen environment. Manufacturer decline any
responsibility in case misuse of the flame
Always light the burner before you put cookware. To light the burner:
1.Turn the control knob counterclockwise to the maxi-
mum position ( 
) and push it down.
2.Keep the control knob pushed for approximately 5 seconds; this will let thermocouple to warm up. If not, the gas supply will be interrupted.
3.Adjust the flame after it is regular.
If after some tries the burner does not light, check if the crown and its cap are in correct positions.
1
2
3
4
1Burner cap
2Burner crown
3Ignition candle
4Thermocouple
Warning! If the burner does not light after 15 seconds, release the control knob, turn it into off
position and try to light the burner again after minimum 1 minute.
7
