Zanussi ZHI 600 Unpacking, The fixing kit comprises, Fitting the Wall Brackets, Clearance Height

Clearance Height

A clearance height of 650mm (25 1/2 ”) is required when installed above a built-in electric hob, or 700mm (27 1/2 ”) when installed above a built-in gas hob.

Aclearance height of 685mm (27”) is required when installed above a slot-in electric cooker, or 787mm (30 1/2 ”) when installed above a slot-in gas cooker.

When installed between adjoining wall cabinets, the wall cabinets must not overhang the hob and the distance between the underside of the cabinet and the worktop must be 450mm. If the height of the wall cabinet is less than 450mm, a gap of 50mm must be maintained either side of the hob.

This cooker hood must not be installed above a cooking appliance with a high level grill.

Unpacking

The fittings supplied to install this cooker hood can be found with the instruction book inside the packaging.

The fixing kit comprises:

2 - Wall fixing brackets

6 - Decor panel fixing screws

4 - Security fixing screws

Fitting the Wall Brackets

1.Use the paper template provided to mark the hole positions on the wall for the bracket fixing screws (not supplied).

2.Check the hole distances are correct with a tape measure as stated on the template.

3.At this stage it is important to allow 15mm

(1/2”) clear space above the cooker hood to enable it to be hooked onto the brackets and for subsequent removal for decorating or servicing.

	Hob
A: Built-in Electric Hob:	650mm clearance
B: Built-in Gas hob:	700mm clearance

C: Slot-in Electric Cooker: 685mm clearance

D: Slot-in Gas Cooker: 787mm clearance

12