Cool Check Guide

The guide consists of a temperature sensitive strip sealed in a shelf trim.

When the fridge is operating at the safe temperature to store food the guide will appear black. If the temperature rises above this level the guide will show the words TOO WARM.

Positioning of the Cool Check

The shelf with the cool check temperature guide must be placed in the fridge according to the instructions located on the fridge wall and always ensure the guide is at the front.

If the Cool Check shows TOO WARM

In certain conditions the temperature guide may show TOO WARM if:

¥The fridge is switched off

¥The door has been recently opened

¥A quantity of warmer food has been introduced to the fridge

¥The fridge temperature is above the recommended maximum for the safer storage of food.

The cool check will change to show ÒTOO WARMÒ very quickly after the door has been opened. It will however take a number of hours to return to black, indicating that the temperature is correct.

The appliance should be left overnight and the cool check examined in the morning. If the cool check shows TOO WARM, turn the appliance to a colder setting leave overnight and examine again the following morning.

Hints and Tips

¥The guide is only suitable for use in the model supplied.

¥The guide will not operate in the freezer compartment.

¥When cleaning the shelf take care not to immerse in water, and wipe away any spills.

TOO WARM

CCOO2

8

Page 8
Image 8
Zanussi ZI 7243 manual Cool Check Guide, Positioning of the Cool Check, If the Cool Check shows TOO Warm