OPERATION
Before using
Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water).
Do not use soap or detergent as the smell may linger. Dry thoroughly.
Use of the freezer
Control panel
A B C D E F G H I
AON/OFF light
BFreezer button ON/OFF
CTemperature setting button (warmest)
DTemperature indicator
ETemperature setting button (coldest)
FAlarm reset light
GAlarm reset button
HFast Freeze light
IFast Freeze button
A.Light ON/OFF
B.Button ON/OFF
ON: Press the button (B). The pilot light (A) switches on.
OFF: Keep pressed the button (B) until the pilot light
(A) and the temperature indicator switches off.
C - E. Temperature setting buttons
The temperature can be adjusted between
By pressing the button (C or E), the current temperature setting flashes on the indicator. It is only possible to modify the temperature with the indicator flashing. To set a warmer temperature, press button
(C). To set a colder temperature, press button (E). The indicator display the newly selected temperature for a few seconds and then shows again the inside compartment temperature.
The newly
Attention!
During the initial stabilising period the temperature displayed can not correspond to the requested temperature.
D. Temperature indicator
During normal use the indicator shows the temperature inside the freezer.
Attention!
A difference between the temperature displayed and temperature setting is normal. Especially when:
-a new setting has recently been selected
-the door has been left open for a long time
-warm food has been placed in the compartment.
5
