INSTALLATION

Important

IF YOU ARE DISCARDING AN OLD APPLIANCE THAT HAS A LOCK OR CATCH ON THE DOOR, YOU MUST ENSURE THAT IT IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE.

Positioning

This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rating plate, which is located at the left on the inside of the appliance.

The following table shows which ambient temperature is correct for each climate classification:

SN +10°C to + 32°C

N+16°C to + 32°C

ST +18°C to + 38°C

T+18°C to + 43°C

It should be located in a dry atmosphere, out of direct sunlight and away from extreme temperature e.g. not next to a boiler or radiator, or in a very cold room e.g. an outhouse, where the temperatures may fall below 10°C (50°F). If these temperatures are exceeded i.e. colder or warmer, then the appliance may not operate correctly.

You should also ensure that air can circulate freely around the back and the top of the cabinet. There must also be at least 100 mm (4”) distance between the top of the cabinet and any overhanging kitchen furniture (A). Ideally, the appliance should not be positioned beneath overhanging furniture (B).

There should also be a gap of 25 mm either side of the appliance. Do not obstruct the space underneath. The back of the cabinet may be placed close to the wall but must not touch it. DO NOT install in places with restricted ventilation.

Adjust the level of the appliance by screwing out the adjustable foot, or feet, at the bottom of the cabinet using your fingers.

Rear spacers

In the bag with the documentation, there are two spacers which must be fitted as shown in the figure.

Slacken the screws and insert the spacer under the screw head, then re-tighten the screws.

Depending upon the position which you choose for your appliance, you may wish to reverse the way in which the door opens. To do this, refer to instructions on “Door reversal”.

Please ensure that when the appliance is installed it is easily accessible for the engineer in the event of a breakdown.

Important

It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

100 mm

 

A

B

10 mm

10 mm

NP007

 

D200

 

D594

14

Page 13 Page 15
Page 14
Image 14
Zanussi ZLA 99 W manual Installation, Positioning
Page 13 Page 15

ZLA 99 W specifications

The Zanussi ZLA 99 W is a compact and efficient refrigeration solution, designed to meet the needs of those seeking both style and functionality in their kitchen appliances. With a focus on energy efficiency and space optimization, this product is ideal for small apartments, studios, or as an additional unit in larger homes.

One of the standout features of the Zanussi ZLA 99 W is its A+ energy rating, which ensures it operates at a minimal environmental impact while keeping energy costs low. This efficiency is complemented by its advanced cooling system that maintains a consistent temperature throughout the appliance, ensuring that food stays fresher for longer. The cooling technology utilized in the ZLA 99 W helps reduce temperature fluctuations, which can lead to spoilage.

The appliance boasts a total capacity of 99 liters, providing ample storage space despite its compact design. The interior layout is designed for maximum convenience, featuring adjustable shelves and door racks to accommodate items of various sizes. This allows users to customize the storage space to fit their particular needs, making it easier to organize food and beverages.

Another key characteristic of the Zanussi ZLA 99 W is its stylish white finish, which seamlessly blends with a variety of kitchen decors. The sleek and modern design not only looks good but is also easy to clean, making maintenance a breeze.

In terms of noise levels, the ZLA 99 W operates quietly, emitting only 39 dB. This makes it suitable for open-plan living spaces where noise can be a concern. Additionally, the appliance includes a reversible door feature, enabling users to position it in a way that best fits their kitchen layout.

The Zanussi ZLA 99 W is also equipped with a simple mechanical control system that allows users to set and adjust the desired temperature with ease. This intuitive design eliminates the complexity often found in more advanced systems, making it user-friendly for all demographics.

Overall, the Zanussi ZLA 99 W is a versatile and reliable refrigeration option that combines efficiency, style, and practicality. Its thoughtful features make it an excellent choice for those needing a compact yet capable cooling solution in their home.
Top Page Image Contents