ZMC30STQ t
15
When your oven is plugged in for the first time or when power resumes after a power interruption, the display
window flash and show " ---- "
Example: To set 4.30
1. Touch the Clock button.
2. Set the time to " 4:00 " using the set t ing control knob
3. Touch the Clock Button
4. Set the time to " 4:30 " using the set t ing control knob
5. Touch the Clock button. (The T ime will now be set)
NOTE : It is possible to display the current time even after starting the mode set, by pressing the
Clock button (the time is displayed for 2 seconds).
The oven is equipped with a safety device which prevents pre-set cooking times from being tampered with
while the cooking is underway, in order to avoid accidental and dangerous extensions to the cooking time
which might cause the food to burn.
To activate this feature:
1. Touch and hold the ’ Stop ’ button for 5 sec’s.
2. A short beep will be heard and it will no longer be possible to alter the times during cooking in any mode.
To cancel this feature press the ’Stop’ button for 5 seconds until a beep is heard
There are two way to stop the oven whilst it is in use.
1. Press the Stop/Clear button
• You may restart the oven by pressing the Start button
• Pressing Stop/Clear again will reset the current programme
2. Open the door
• You may restart the oven by closing the door and pressing the Start button
• Pressing Stop/Clear again will cancel the current programme
This model is equipped with an automatic cooling cycle which comes into action whenever the oven is very
hot (for example after something has been cooked for a long time). During this cycle the word “COOL ” will
appear on the display. The fans and the oven light will come on (they will go off automatically).
At the end of each cooking the cooling fan will remain in operation until the oven door is opened.
Setting the ClockChild safety lockTo Stop the Oven