Using the Appliance

Before Use

Remove all securing tapes.

Wash the inside of the appliance with lukewarm water with a little bicarbonate of soda added (5 ml to 0,5 litre of water). Do not use soap or detergent as the smell may linger. Dry the appliance thoroughly.

Do not use detergents, abrasive powders, highly perfumed cleaning products, wax polishes or products containing alcohol.

)To Start the Appliance

1.Allow the appliance to stand for 2 hrs after installation.

2.Plug in the appliance and switch on at the mains supply.

3.Turn the thermostat control to the required setting. A setting of 3 - 4 is usually suitable for normal operation (see thermostat control).

4.Leave the appliance for approximately 4 hours for the correct temperature to be reached before placing food inside.

Thermostat Control

The thermostat control situated inside the refrigerator regulates the temperature of the larder compartment. Thermostat control is marked from 1-5 the higher the number, the colder the setting.

Position

0

-

Off

Position

1

-

minimum coldness

Position

5

-

maximum coldness

Hints for storage

Below is the recommended storage positions for various food types:

1.Frozen food storage & ice making

2.Ready-cooked foods

3.Foods in dishes

4.Opened cans

5.Milk, dairy products

6.Fresh meat, cold cuts, sausages, etc.

7.Fruits, vegetables, salads

8.Cheese, butter

9.Eggs

10.Yoghurt, Cream

11.Small bottles, soft drinks

12.Large bottles, drinks

7

Page 7
Image 7
Zanussi ZRC 243W manual Using the Appliance, Hints for storage, Before Use, To Start the Appliance, Thermostat Control