Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected.

The inlet hose must hang down vertically from the supply tap.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

DO NOT use connection hoses which have previously been used for an old appliance.

This appliance has been fitted with safety features which will prevent the water used in the appliance from returning back into the drinking water system. This appliance complies with the applicable plumbing regulations.

Proceed as follows:

Remove the machine’s worktop by unscrewing the two rear retaining screws, pull the worktop from the back of the machine and slide out the front slots, lifting the worktop.

Insert the machine after adjusting the levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed. During all operations that involve accessibility to internal components the dishwasher has to be unplugged.

Be sure that once the appliance has been installed, it is easily accessible for the service engineer in the event that a repair is required.

If the dishwasher is later used as a free-standing appliance, the original worktop must be re-mounted.

The plinth on free-standing appliances is not adjustable.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Water supply connections

We recommend that this dishwasher is connected to your cold water supply.

For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto a 3/4" gas thread spout.

The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area.

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine.

2.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

The drain hose can face either to the right or left of the dishwasher

Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.

The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine.

If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided.

Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided.

Attention!

Our appliances are supplied with a security device to protect against the return of dirty water back into the machine.

If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We therefore advise you to remove it.

19

Page 18 Page 20
Page 19
Image 19
Zanussi ZSF 6066 manual Installation instructions, Fitting under a counter, Levelling, Water supply connections
Page 18 Page 20

ZSF 6066 specifications

The Zanussi ZSF 6066 is a compact, undercounter dishwasher designed to bring efficiency and convenience to any kitchen. With its sleek design and powerful features, this model is ideal for those seeking a reliable appliance that occupies minimal space while delivering superior cleaning results.

One of the standout features of the Zanussi ZSF 6066 is its capacity to accommodate up to 10 place settings. This makes it a great option for small families or those who entertain guests regularly. The flexible basket system allows for easy loading and unloading, meaning you can fit a range of dishware sizes and shapes without hassle. This thoughtful design ensures that larger pots and pans have a designated space, optimizing the interior layout.

Energy efficiency is a key characteristic of the ZSF 6066. It operates using relatively low water and energy consumption, which is not only eco-friendly but also helps reduce utility bills. The Energy Rating is A+, making it a suitable choice for environmentally conscious consumers.

The appliance is equipped with several washing programs tailored to different cleaning needs. These include Eco, Intensive, and Rapid modes, catering to everything from lightly soiled dishes to heavily soiled cookware. The Eco program is particularly notable, as it uses less water and energy without compromising on cleaning performance.

The built-in delay start feature is another highlight, allowing users to set the dishwasher to run at a more convenient time, thus taking advantage of off-peak electricity rates. The ZSF 6066 also incorporates a salt light indicator and rinse aid indicator, providing users with peace of mind regarding maintenance.

Moreover, the noise level of the Zanussi ZSF 6066 is impressively low, operating at just 49 dB. This makes it suitable for open-plan living spaces where minimal disruption is desired.

Safety is paramount in any kitchen appliance, and the ZSF 6066 comes equipped with a child lock feature, ensuring that little ones cannot accidentally access the machine while it's in use.

In summary, the Zanussi ZSF 6066 embodies reliability and practicality, offering efficient cleaning, a variety of wash programs, and user-friendly features. Its compact design and energy-efficient operation make it a smart choice for small homes and apartments, providing the essential functions of a larger dishwasher without taking up excessive space.
Top Page Image Contents