Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

570

-

 

600

820

 

600

 

IN05

 

Proceed as follows:

Remove the machine’s worktop by unscrewing the two rear retaining screws, pull the worktop from the back of the machine and slide out the front slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed. During all operations that involve accessibility to internal components the dishwasher has to be unplugged.

Be sure that once the appliance has been installed, it is easily accessible for the consumer service department.

If the dishwasher is later used as a free-standing appliance, the original worktop must be re-mounted.

The plinth on free-standing appliances is not adjustable.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Water supply connections

This dishwasher must be plumbed into a cold water supply.

For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto either a 3/4" inch gas thread spout or to a purpose made quick-coupling tap such as the Press-block.

The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected up.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been used in another appliance.

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

20

Page 19 Page 21
Page 20
Image 20
Zanussi ZSF 6160 manual Installation instructions, Fitting under a counter, Levelling, Water supply connections
Page 19 Page 21

ZSF 6160 specifications

The Zanussi ZSF 6160 is a versatile and efficient dishwasher designed to meet the needs of modern households. Boasting a sleek, contemporary design, this model stands out for its reliable performance and advanced features. With a focus on user-friendliness and energy efficiency, the ZSF 6160 underscores Zanussi's commitment to quality and innovation in home appliances.

One of the standout features of the ZSF 6160 is its impressive capacity. It offers a spacious interior, comfortably accommodating up to 15 place settings, making it ideal for larger families or those who often entertain guests. This ensures that even the most substantial loads can be washed in one go, saving both time and water.

The dishwasher comes with several wash programs tailored to different needs. The Quick Wash program is particularly useful for those in a hurry, providing a thorough clean in just 30 minutes. For more heavily soiled items, the Intensive Mode delivers powerful cleaning action, while the Eco setting focuses on delivering effective washes with minimal energy consumption, showcasing Zanussi's commitment to sustainability.

In addition to its performance, the ZSF 6160 integrates several advanced technologies to enhance its efficiency and ease of use. The AirDry technology opens the dishwasher door automatically in the last moments of the cycle, allowing air to circulate and dry dishes naturally. This not only promotes better drying results but also reduces the need for energy-consuming drying functions.

The dishwasher is designed with user convenience in mind. It features an adjustable upper rack that can be raised or lowered to create more space for larger items. Furthermore, the simple control panel is intuitive and easy to navigate, making it accessible for all users.

Another important aspect of the ZSF 6160 is its quiet operation. With a noise level of just 47 dB, it runs quietly in the background, allowing users to enjoy their home environment without the distraction of loud appliance noise.

The Zanussi ZSF 6160 stands out as a reliable and efficient dishwasher, combining practicality with smart technology. Its thoughtful features, combined with the brand's reputation for quality, make it a compelling choice for anyone in need of an effective dishwashing solution. With the ZSF 6160, users can look forward to cleaner dishes, enhanced convenience, and lower energy consumption—all in one stylish package.
Top Page Image Contents