Operating sequence

1. Check the filters

Ensure they are clean and properly positioned (see "Maintenance and cleaning").

2. Press the ON/OFF push button

The ON/OFF indicator light comes on.

3.Check that there is rinse aid and salt

4.Load the dishes

Remove any scraps of food.

Pull the lower basket out and arrange the saucepans, plates and cutlery in it.

Pull the upper basket out and arrange the plates, saucers, glasses and cups etc. in it.

Slide the baskets back into the machine.

5.Ensure that the spray arms can rotate freely.

6.Measure out detergent

Add the required amount of detergent into the dispenser according to the "Washing programmes" chart.

Close the detergent dispenser lid.

7. Set the programme

The selection of a programme occurs with the door partially opened.

Press the programme push button which corresponds to the washing programme you wish to select, the corresponding indicator light will flash.

8. Start the programme

Close the door.

An audible signal advises you that the programme has started.

The indicator light which corresponds to the programme under way is now permanently on.

9. At the end of the washing programme

At the end of the programme the dishwasher will automatically stop and an audible signal informs you that the programme has finished.

The "END OF CYCLE" indicator lights flashes.

The ON/OFF indicator light remains on until the ON/OFF push button is depressed.

10. Switch off the dishwasher

Wait 15/20 minutes before opening the dishwasher’s door; in this way you will avoid burning yourself when removing the dishes and avoid also the damage of the nearby furniture caused by the escape of steam.

Switch off the dishwasher by pressing the ON/OFF push button and open the door.

Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.

In general it is not advisable to open the door while the machine is working; if the door is opened however, a safety device ensures that the machine stops.

Important!

Care must be taken if the door is opened during the hot phase or immediately after a

programme has finished, as steam may escape.

ZT 695 specifications

The Zanussi ZT 695 is a versatile and efficient kitchen appliance that has been designed to elevate your cooking experience. This sleek and modern device is a multifunctional oven that caters to a variety of culinary needs, making it an essential addition to any home kitchen.

One of the main features of the Zanussi ZT 695 is its impressive cooking capacity. With ample space available, this oven can accommodate large meals, making it suitable for families and those who love to entertain. Its spacious interior allows you to prepare multiple dishes at once, improving your cooking efficiency.

The Zanussi ZT 695 comes equipped with advanced heating technologies. It utilizes a unique fan-assisted cooking system, which ensures even heat distribution throughout the oven. This technology not only reduces cooking time but also helps in achieving consistent results across all your dishes. Whether you are baking, roasting, or grilling, you can trust that the Zanussi ZT 695 will deliver perfectly cooked meals every time.

Another standout characteristic of the ZT 695 is its user-friendly interface. It features intuitive controls and a digital display that makes the selection of cooking functions straightforward. With various pre-set programs available, you can easily choose the ideal settings for your dish, whether you are preparing a delicate soufflé or a hearty roast.

Energy efficiency is also a priority for the Zanussi ZT 695, which is designed to minimize power consumption while maximizing cooking performance. This eco-friendly feature not only reduces your electricity bill but also contributes to a reduced carbon footprint, aligning with modern environmental standards.

Cleaning the Zanussi ZT 695 is a breeze, thanks to its smooth enamel interior and removable parts. The self-cleaning function further simplifies maintenance, allowing you to spend more time enjoying your culinary creations and less time scrubbing away at stubborn stains.

Overall, the Zanussi ZT 695 combines functionality, efficiency, and ease of use, making it an outstanding choice for those who are passionate about cooking. With its array of features and technologies, it promises to enhance your kitchen experience, making every meal a delightful affair.

Zanussi ZT 695 manual Operating sequence

Models: ZT 695