Zebra Technologies GC420d Identifying Fonts in Your Printer

Fonts and Your Printer

36

P1052685-001 GC420d™ User Guide 5/23/2012

Identifying Fonts in Your Printer

Fonts and memory are shared by the programming languages in the printer. Fonts can be

loaded in many memory areas in the GC420 printer. ZPL programming can recognize EPL and

ZPL fonts. EPL programming can only recognize EPL fonts. See the respective programmer

guides for more information on fonts and printer memory.

ZPL Fonts:

• To manage and download fonts for ZPL print operation, use the Zebra Setup utility or

ZebraNet™ Bridge.

• To display all of the fonts loaded in your printer, send the printer the ZPL ^WD command.

See the ZPL Programmers Guide for details.

• Bitmap fonts in the various printer memory areas are identified by the .FNT file

extension in ZPL.

• Scalable fonts are identified with the .TTF, .TTE or .OTF file extensions in ZPL.

EPL does not support these fonts.

EPL Fonts:

• To download fonts for EPL print operations, use the Zebra Setup Utility or ZebraNet™

Bridge to send files to the printer.

• To display Soft Fonts (ext.) available to EPL, send the printer the EPL commandEI.

• All EPL fonts displayed are bitmap fonts. They do not include the .FNT file extension

or the horizontal (H) or vertical (V) designators that are displayed with the ZPL

command ^WD as described above in ZPL Fonts.

• To remove non Asian EPL fonts with EPL programming, use the EK command.

• To remove EPL Asian fonts from the printer, use the ZPL ^ID command.

Contents

Main Page iii iv FCC Compliance Statement Environmental Management Page vi Who Should Use This Document How This Document Is Organized vii Contacts Contacts viii Document Conventions Contents x Page xii Introduction GC420d Thermal Printers Whats in the Box? Unpack and Inspect the Printer Your Printer Opening the printer Printer Features Page Status Light Page Getting Started Attaching Power Loading Roll Media Preparing Media Placing the Roll in the Media Compartment Page Page Printing a Test (Printer Configuration) Label 16 Pre-install Windows Printer Drivers PlugNPlay (PnP) Printer Detection and Windows operating systems 17 Universal Serial Bus (USB) Device Communications Serial Port and Windows operating systems Ethernet Connecting your Printer to a Computer Interface Cable Requirements Page 20 Serial Communications Autobaud ZPL ^SC Command EPL Y Command Resetting the Default Serial Port Parameters 2. While the status LED rapidly flashes amber and green, press the feed button. Serial baud, NO parity, 8 data bits, 1 stop bit and a HARDWARE and SOFTWARE (merged) data Page 23 After Your Printer is Connected Testing Communications by Printing Page Print Operations Determining Printer Configuration Long Term Printer In-activity or Storage Thermal Printing Modes of Printing Print Media Types Page Determining Thermal Media Types To perform a media scratch test, complete these steps: Replacing Supplies Adjusting the Print Width Adjusting the Print Quality Media Sensing Printing on Fan-Fold Media Page Printing with Externally Mounted Roll Media Externally Mounted Roll Media Considerations: Fonts and Your Printer Localizing the Printer with Code Pages Identifying Fonts in Your Printer Stand Alone Printing Sending Files to the Printer Print Meter EPL Line Mode Printer Options 40 Label Dispenser Option ^XA ^MMP ^XZ Page Page Zebra KDU Printer Accessory 44 KDU Plus Printer Accessory * - Not real values ( 45mA + 120mA + 25mA ) + 50mA <Max. Current Current Draw ZBI 2.0 Zebra Basic Interpreter Page Maintenance This section provides routine cleaning and maintenance procedures. Cleaning Cleaning the Printhead Media Path Considerations 51 Sensor Cleaning Platen Cleaning and Replacement Other Printer Maintenance Replacing the Printhead Page Page Page Page Troubleshooting Status Light Descriptions Status Light Error Resolutions Page Print Quality Problems No print on the label. The printed image does not look right. There are long tracks of missing print (blank vertical lines) on several labels. The printing does not start at the top of the label or misprinting of one to three labels. A ZPL label format was sent to, but not recognized by, the printer. A EPL label format was sent to, but not recognized by, the printer. Manual Calibration Troubleshooting Tests Resetting the Factory Default Values Communications Diagnostics Page Feed Button Modes Feed Button Modes Amber - Red Flashing Green Amber www.zebra.com Page Page Page Universal Serial Bus (USB) Interface Parallel Interface PRINTER DB-25 Pin No. Centronics Pin No. DB-25 to Centronics (Cable) Serial Port Interface Connecting the Printer to a DCE Device Page Page Page Page C 82 Managing Printer Configuration with ZPL Programming ZPL Printer Configuration Format ZPL Configuration Status to Command Cross-reference Page Page Printer Memory Management and Related Status Reports ZPL Programming for Memory Management