Installer menus

Use the Installer menus to make adjustments

The range of values is 0 - 255. Use (adjust) keys to choose: (1) With number 255 the feature is inactive. (2) Other numbers determine the start channel. (3) Set the volume level as desired before exiting the Installer menu. 0 is the “AUX” channel.

11 HOSPITAL MODE

Not used in Concierge-series TVs. Leave at default setting 0.

12 CHAN LOCK (Channel Lock)

When set to 1 the CHAN LOCK is ideal if a cable box (or similar) is the sole source for programming—and the TV must always be on the same channel. Changing channels with the Channel up/down or or keypad numbers is impossible. Channel Lock is inactive when set to 0 (default).

Generally, this feature is used in connection with START CHAN/VOL (line 11) where the start channel may, for example, be set to 3 or 4. If the start channel is 3 then the TV will remain on channel 3. NOTE: When channel lock is active AUTO PROGRAM and CH. ADD/DEL in the SETUP MENU are not active.

13 GHOST CH. (Ghost Channel)

When set to 1, the current channel number is displayed in the upper right corner of the CRT. The number moves slightly to prevent damage to the screen. The default is “0” or OFF. NOTE: When captions are on, the “ghost channel” is not displayed.

14 SCAN MODE

Allows variation in setting the On/Off with Channel UP/DOWN. You may opt for TV channels only; TV channels + Off/ON; TV channels + FM radio; TV channels + FM radio + Off/On with these settings for Scan Mode:

Scan mode

Characteristics

0Channel up/down keys change chan- nels only.

1Channel down below the lowest channel (or channel up higher than the highest) and TV turns off.

2Channel Up/Down + FM.

3Channel Up/Down + Off/On.

15 TEXT MODE

Determines whether TEXT 1, TEXT 2,TEXT 3, or TEXT 4 decoding is enabled when TEXT is turned on (either from the Setup Menu or directly with CC on the remote).

TIP: Set Text Mode to 1 only if text is offered in your video sys- tem.

16 SLEEP TIMER

When set to 1, the SLEEP TIMER feature may be used (but no message is displayed prior to turn-off). When set to 0, the sleep timer is not available.

17 ALARM

Gives you the option of making the alarm function available to the end-user. Set to 1, alarm function is available. Set to 0 to withhold this function. The clock must be set in order to use the alarm.

18 CH. OVERRIDE (Channel Override)

When set to 1, the user is allowed to select channels with either Channel up/down or by direct keypad entry. When set to 0, only those channels that are entered for scanning may be selected.

19. OLD OCV (On Command Video)

Set to 1 for operation with “SpectraMate” systems from On Command Corporation.

20. CAPTION LOCK

Set to 1 to restore previous caption On/Off state after TV turns off when set to 0, captions are always off when TV is initially turned on.

21. FUNCTION PRE

Set to 0 to suppress CHANNEL PREVIEW FUNCTION menu with some pay per view systems.

22. FEATURE LEVEL

Set to ZEN 1 for Zenith compatible remote control operation, set to 0 for PLbl for Zenith private label compatible remote control operation.

Some of the functions shown above may not be available on your TV (such as FM).

206-3489-O

P A G E 3 3