Zenith DVB412 warranty Title, Reference, Specifications

Models: DVB412

1 26
Download 26 pages 4.07 Kb
Page 25
Image 25

Troubleshooting

Symptom

 

Possible Cause

 

Correction

 

 

 

 

 

No power.

The power cord is disconnected.

Plug the power cord into the wall outlet

 

 

 

 

securely.

 

 

 

 

 

The power is on, but

No disc is inserted.

Insert a disc. (Check that the DVD or

the DVD player does

 

 

 

audio CD indicator in the display

not work.

 

 

 

window is lit.)

 

 

 

 

 

No picture.

The TV is not set to receive DVD

Select the appropriate video input

 

 

signal output.

 

mode on the TV.

 

 

 

 

 

 

The video cable is not connected

Connect the video cable securely.

 

 

securely.

 

 

 

 

 

 

 

No sound.

The equipment connected with the

Select the correct input mode of the

 

 

audio cable is not set to receive DVD

 

audio receiver so you can listen to the

 

 

signal output.

 

sound from the DVD player.

 

The power of the equipment connected

Turn on the equipment connected with

 

 

with the audio cable is turned off.

 

the audio cable.

 

 

 

 

 

 

The AUDIO options are set to the

Set the Digital Audio Output to the

 

 

wrong position.

 

correct position, then turn on the DVD

 

 

 

 

player again by pressing POWER.

 

 

 

 

 

The DVD player does

An unplayable disc is inserted.

Insert a playable disc. (Check the disc

not start playback.

 

 

 

type, color system, and regional code.)

 

The rating level is set.

Cancel the rating function or change

 

 

 

 

the rating level.

 

 

 

 

 

The remote control

The remote control is not pointed at

Point the remote control at the remote

 

the remote sensor on the DVD player.

 

sensor of the DVD player.

does not work properly.

 

 

 

 

 

 

The remote control is too far from the

Operate the remote control closer to

 

 

 

DVD player.

 

the DVD player.

 

 

 

 

 

Specifications

title

General

Power requirements: AC 120 V , 60 Hz

Power consumption: 12W

Dimensions (Approx.):

430 x 39 x 242 mm (W x H x D) without foot

Weight (Approx.): 2.2 kg

Operating temperature:

5 °C to 35 °C (41 °F to 95 °F)

Operating humidity: 5 % to 90 %

Outputs

VIDEO OUT:

1 Vp-p 75 Ω, sync negative, RCA jack x 1

S-VIDEO OUT:

(Y)1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1

(C)0.3 V (p-p) 75 Ω

COMPONENT VIDEO OUT:

(Y)1.0 V (p-p), 75 Ω,negative sync, RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2

Note:

AUDIO OUT:

2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1

DIGITAL OUT (COAXIAL):

0.5V (p-p), 75 Ω, RCA jack x 1

System

Laser:

Semiconductor laser, wavelength 650 nm

Signal system: NTSC

Frequency response:

DVD (PCM 96 kHz): 8 Hz to 44 kHz

DVD (PCM 48 kHz): 8 Hz to 22 kHz

CD: 8 Hz to 20 kHz

Signal-to-noise ratio:

More than 100 dB (ANALOG OUT connectors only)

Harmonic distortion: Less than 0.008%

Dynamic range:

More than 90 dB (DVD/CD)

Accessories

S-Video cable (1), Video cable (1), Audio cable (1), Remote control (1), Batteries (2)

Reference

Design and specifications are subject to change prior notice.

25

Page 25
Image 25
Zenith DVB412 warranty Title, Reference, Specifications