8. CUSTOMIZATION
85
206-3813
8-14. Setting Default Signal Out
Out to TV -- Default Connection
Lets you choose whether the OUT TO TV jack is connected to either the CABLE
IN or ANT INjack in standby mode.
To set the standby mode default signal source:
1.
Press the
Menu
button on the Remote Control to display the on-screen menu.
2.
Scroll down using “
E
” on the remote control.
3.
Select the
Preference
menu by pressing “ ”.
4.
Scroll down to Out to TV using “
E
”.
5.
Move the highlight to the right with “
G
”.
6.
Select
Antenna
or
Cable
and press to return to the previous level.
7.
Press the
Exit
button on the remote control to return to TV viewing.