BCZ4000DL / BCZ4000DW / BCZ4200CL

6. Set up

INSTALLING HANDLE (BCZ4000DL)

•Tighten the grip firmly. If the grip becomes loose, it might move while you are working, causing danger.

•Do not loosen or twist the grip while you are working.

•Always stop the engine and make sure the blade has stopped before adjusting the position of the loop

handle.

1.Remove the grip of the loop handle, washer and mounting bolt associated with this product, and remove the stopper.

2.Push the loop handle onto the main pipe as shown in Fig. 1.

Be careful not to mount the loop handle in the wrong direction.

3.Push the stopper in the direction of the arrow as shown in Fig. 1 and insert the mounting bolt. Then, position the washer around the mounting bolt, and turn the grip to tighten securely.

(1)Mounting bolt (2)(3) Main pipe

(4)Engine side

(5)Stopper

(6)Washer

(7)Grip

(8)Insert

(9)Loop handle

(10)Loosen

(11)Tighten

INSTALLING HANDLE (BCZ4000DW)

•Loosen the 4bolts on the upper cap and insert the handle. Retighten the bolts securely.

INSTALLING HANDLE (BCZ4200CL)

•Loosen the handle knob to open the bracket and in- sert the handle. Retighten the knob securely.

INSTALLING CUTTING ATTACHMENT GUARD

•Attach the cutting attachment guard with the bolts provided to the shaft.

INSTALLING BLADE

1.Put the angled bar(1) into the side holes of the inner holder and the gearcase.

2.Remove the nut (Lefthanded) and the outer holder(3) from the gearshaft.

3.Put the blade onto the inner holder(2). Make the marked side face the holder.

4.Put the outer holder(3) onto the gearshaft making the recessed side face the blade.

5.Fasten the blade by the nut and the cover(4).

INSTALLING LINE HEAD

1.While locking the gear shaft by inserting the supplied tool into the upper holder on the gear box, loosen and remove the nut (left-handed).

2.Fit the line head assembly to the gear shaft. Hand tighten it securely.

CUTTING ATTACHMENT GUARD SKIRT FOR LINE HEAD

•When using line head, make sure to attach the guard skirt.

BALANCE UNIT

1.Put on strap and attach unit to strap.

2.Slide clamp up or down until unit balances with head aparting from the ground when using it.

GB-8

Page 7 Page 9
Page 8
Image 8
Zenoah BCZ4000DL owner manual Set up
Page 7 Page 9

BCZ4000DL specifications

The Zenoah BCZ4000DL is a remarkable addition to the world of outdoor power equipment, specifically designed for those who require efficiency and reliability in their brush cutting tasks. As part of Zenoah's esteemed lineup, the BCZ4000DL utilizes cutting-edge technologies to deliver performance that is unmatched in its category.

At the heart of the BCZ4000DL is its powerful 40cc two-stroke engine, which offers a robust power-to-weight ratio. This engine has been engineered for optimal efficiency, ensuring that users can tackle the toughest tasks without being weighed down by excessive bulk. The engine is designed with advanced ignition technology, promoting easy starting and consistent performance, even in cold conditions.

One of the standout features of the BCZ4000DL is its ergonomic design. The adjustable handle gives users the ability to customize their grip for enhanced comfort, significantly reducing fatigue during prolonged use. The unit also boasts a lightweight construction, which promotes easier maneuverability, making it an excellent choice for both professional landscapers and homeowners alike.

User convenience is further enhanced through the inclusion of a low-vibration system, which minimizes the amount of vibration transmitted to the user’s hands. This feature not only improves comfort but also allows for more precise control while cutting, contributing to cleaner and more efficient results.

The BCZ4000DL is equipped with a high-capacity fuel tank, allowing for longer operating times between refueling. This is especially valuable for larger jobs where downtime for refueling can interrupt workflow. Additionally, the model incorporates a heavy-duty cutting head that is capable of handling various types of vegetation, from tough weeds to thicker brush, making it versatile for a range of applications.

To ensure durability and longevity, the BCZ4000DL features high-quality construction materials that can withstand rigorous use in various environmental conditions. Coupled with Zenoah's commitment to sustainability, this model is designed to reduce emissions without compromising power or efficiency.

In summary, the Zenoah BCZ4000DL stands out for its powerful engine, ergonomic design, low-vibration technology, and high-capacity fuel system. This combination of features makes it an ideal choice for anyone seeking a reliable and efficient brush cutter for demanding tasks in both professional and residential settings. With the BCZ4000DL, users can take on their outdoor challenges with confidence, knowing they have a quality tool in hand.
Top Page Image Contents