BCZ4500DL / BCZ4500DW / BCZ4500CL / BCZ5000DL / BCZ5000DW / BCZ5000CL

8. Operation

STARTING ENGINE

WARNING

•The cutting head will start rotating upon the en- gine starts.

1.Feed fuel into the fuel tank and tighten the cap se- curely.

2.Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects, as it will start rotating upon starting of the engine.

3.Push the primer pump several times until overflown fuel flows out in the clear tube.

(1)

4. Move the choke lever to the closed position.

(1)

(2)

(3) (1) choke lever

(2) close

(3) open

5.Set the ignition switch to the “RUN” position. Place the unit on a flat, firm place.

Keep the cutting head clear of everything around it.

(1)

(1)

(1) Ignition switch

6.While holding the unit firmly, pull out the starter rope quickly until engine fires.

WARNING

•The product is equipped with a centrifugal clutch mechanism, so the cutting attachment begins to

rotate as soon as the engine is started by putting the throttle into the start position. When starting the engine, place the product onto the ground in a flat clear area and hold it firmly in place so as to ensure that neither the cutting part nor the throttle come into contact with any obstacle when the en- gine starts.

IMPORTANT

•Avoid pulling the rope to its end or returning it by re- leasing the knob. Such actions can cause starter fail- ures.

7.Pull out the throttle to return the choke to the open position.

NOTE

•These model’s choke returns to the open position au- tomatically when the throttle is pulled out.

8.Allow the engine to warm up for a several minutes before starting operation.

NOTE

1.When restarting the engine immediately after stop- ping it, leave the choke open.

2.Overchoking can make the engine hard to start due to excess fuel. When the engine failed to start after several attempts, open the choke and repeat pulling the rope, or remove the spark plug and dry it.

STOPPING ENGINE

1.Release the throttle lever and run the engine for half a minute.

2.Shift the ignition switch to the STOP position.

(1)

(1)

(1) Ignition switch

IMPORTANT

•Except for an emergency, avoid stopping the engine while pulling the throttle lever.

9

Page 8 Page 10
Page 9
Image 9
Zenoah BCZ5000DL/DW Operation, Starting Engine, Cutting head will start rotating upon the en- gine starts, Stopping Engine
Page 8 Page 10

BCZ5000DL/DW, BCZ4500DL, BCZ4500DW, BCZ5000DL, BCZ5000DW, BCZ4500, BCZ5000CL, BCZ4500DL/DW, BCZ4500DL / DW, BCZ4500/5000CL specifications

The Zenoah BCZ5000DL/DW and BCZ4500/5000 series are a range of high-performance brushcutters designed for professionals and enthusiasts in landscaping and forestry. These models are recognized for their powerful engines, ergonomic design, and advanced technologies that enhance user experience and efficiency in tackling tough cutting tasks.

One of the standout features of the Zenoah BCZ5000DL and BCZ5000DW is their robust 50cc two-stroke engine. This engine delivers exceptional power and torque, making it ideal for heavy-duty applications. The BCZ4500 series, including the BCZ4500DL and BCZ4500DW, is equipped with a slightly smaller yet equally powerful 45cc engine that provides an excellent balance between weight and performance, ensuring that users can operate the tool for extended periods without fatigue.

These brushcutters come with a user-friendly starting system that reduces the effort needed to start the engine. The Easy Start technology includes a decompression valve and an advanced ignition system, which ensures a smooth and hassle-free starting experience, even in challenging conditions.

Ergonomics is a core focus of the Zenoah design philosophy. The BCZ series features a lightweight design paired with adjustable handles that allow for a comfortable grip and reduced strain during extended use. The anti-vibration system is another critical aspect that minimizes vibrations during operation, ensuring that users can work longer with less risk of fatigue or discomfort.

The cutting capabilities of the BCZ series are versatile, with options to switch between different cutting heads and blades, making them suitable for a variety of tasks, from trimming grass to clearing dense underbrush. This adaptability makes them an essential tool for landscape maintenance, agricultural applications, and forestry work.

Moreover, the build quality of Zenoah products is designed to withstand the rigors of heavy use. These brushcutters are constructed with durable materials that enhance their longevity and reliability in demanding environments.

Additionally, Zenoah places importance on fuel efficiency and emissions control. The BCZ series is engineered to optimize fuel consumption, reducing operational costs while also fulfilling stringent emission regulations.

In conclusion, the Zenoah BCZ5000DL/DW and BCZ4500/5000 series stand out for their powerful engines, ergonomic designs, and technological innovations. These brushcutters are built to meet the demands of professional users while providing reliability and ease of use for everyday tasks. Whether you are a seasoned landscaper or a hobbyist, these models offer the performance and durability needed to efficiently tackle any cutting task.
Top Page Image Contents