English
6. Set up
F1
F2
F3 [EBZ7100RH]
F4 [EBZ7100RH]
■BLOWER TUBES
1.Connect the blower and swivel joint with flexible hose. Clamp both ends of the flexible hose securely with the hardware supplied with the unit.
2.Align the protrusion and the groove provided on the tube ends and twist the tube until connection is locked up.
NOTE
A light lubricant may be used to ease assembly of flexible pipe to blower elbow.
■THROTTLE LEVER [EBZ7100RH] [EBZ7100RH-CA]
•Set up the clamp to the swivel and tighten the screw on the clamp.
(1)Clamp
(2)Swivel
(3)Screw
■THROTTLE CABLE [EBZ7100RH] [EBZ7100RH-CA]
•Use the clamp to fasten the colgate tube containing the throttle cable and the power cable to the hose.
(1)Clamp
(2)Cable
(3)Hose
22
