Mist Kit for EBZ8000 / EBZ8001
3. For safe operation
of impact during transportation.
•When transporting in a vehicle, please use a rope or similar to fix the sprayer firmly to the cargo trailer in an upright position. Please do not transport by bi- cycle or motorbike, as this is dangerous.
PRECAUTIONS CONCERNING FUEL
•The engine of this product is fueled by "mixed gaso- line" that includes highly combustible fuel. Do not refuel or store fuel containers where there is any risk of combustion from incinerators, burners, bonfires, kitchen stoves, electric sparks, welding sparks, etc.
•Smoking while spraying or refueling is dangerous. Please avoid this at all costs.
•When refueling during use, always stop the engine and make sure there are no naked flames in the vi- cinity before refilling.
•Any fuel spilt during refueling should be wiped off completely with a rag or similar before starting the engine.
•After refueling, seal the fuel container, tightly close the fuel tank cap, and start the engine at least 3 meters away.
PRECAUTIONS WHEN REFILLING CHEMCALS
•Before filling the tank with chemicals, please make sure that the intermediate valve is closed.
•After chemical refilling, firmly tighten the tank cap. If not fully tightened the cap may become loose dur- ing spraying, with the risk of physical exposure to the chemicals.
(2)
(1)
(1)OPEN
(2)CLOSE
•Do not fill chemicals over 14 liters.
•Do not mix different chemicals.
•Wash the chemical fluid tank and the nozzle cleanly when you change the type of chemical.
PRECAUTION WHEN STARTING THE ENGINE
•Please keep children, animals, etc. well away when starting the engine and spraying.
PRECAUTIONS WHEN SPRAYING
•Since protective clothing generally offers poor venti- lation and thus places stress on the body, there is a risk of contracting heatstroke or other illness when operating for long periods under high temperatures. Please avoid spraying on hot days, aiming instead for early morning and late afternoon times when tem-
peratures are relatively cool and winds are low.
•When starting work, please pay all due consideration to the spraying time, wind direction, etc., to ensure that no noise disturbance or chemical hazard is caused to nearby residents,
•While spraying please hold the grip firmly at all times and be careful not to point the nozzle in the direction of people or animals.
•While spraying please be careful of the wind direc- tion and always stand on the upwind side, to avoid spraying yourself with chemicals.
•Should you begin to feel even
slightly unwell while spraying, consult a doctor im- mediately. When doing so, inform the doctor of the name of the chemical you were using, the conditions of use, etc.
•If the sprayer is tilted the chemical may leak out through the air holes in the cap. When spraying al- ways make sure you have a firm footing and main- tain your balance.
•Do not touch the spark plugs or plug cords while the engine is running, as you may get an electric shock.
•Do not touch the muffler, spark plugs, or other metal parts with your bare hands while the engine is run- ning or immediately after stopping the engine, as there is the risk of burns due to high temperatures.
PRECAUTIONS AFTER SPRAYING
•Please seal unused chemicals and store them out of the reach of children.
•Do not simply discard empty chemical containers, but dispose of them safely by incinerating, burying, or another similar method. In addition, please take every care that the water used to clean spraying tools does not create any hazard.
•Fully inspect and maintain protective clothing, masks, gloves, and other protective gear in preparation for the next session.
•After completing the work and tidying away chemi- cals and spraying tools, you should immediately take a bath or wash your hands, feet, face, etc. thoroughly with soap, as well as washing your mouth out.
•You should change all clothes worn, including un- derwear, and wash them thoroughly. Clothes worn during spraying should not be worn again the follow- ing day.
•After spraying, please limit your alcohol intake and
