4. For safe operation

1.Never operate a chain saw when you are fatigued, ill, or upset, or under the influence of medication that may make you drowsy, or if you are under the influence of alcohol or drugs.

2.Use safety footwear, snug fitting clothing and eye, hearing and head protection devices.

3.Always use caution when handling fuel. Wipe up all spills and then move the chain saw at least ten(10) feet(three(3)

m)from the fueling point before starting the engine.

3a) Eliminate all sources of sparks or flame (ie. smoking, open flames, or work that can cause sparks) in the areas where fuel is mixed, poured, or stored.

3b) Do not smoke while handling fuel or while operating the chain saw.

4.Do not allow other persons to be near the chain saw when starting the engine or cutting a wood. Keep bystanders and animals out of the work area. Children, pets, and bystanders should be a minimum of thirty(30) feet away when you start or operate the chain saw.

5.Never start cutting until you have a clear work area, secure footing, and planned retreat path from the falling tree.

6.Always hold the chain saw firmly with both hands when the engine is running. Use a firm grip with thumb and fingers encircling the chain saw handles.

7.Keep all parts of your body away from the saw chain when the engine is running.

8.Before you start the engine, make sure the saw chain is not contacting anything.

9.Always carry the chain saw with the engine stopped, the guide bar and saw chain to the rear, and the muffler away from your body.

10.Always inspect the chain saw before each use for worn, Ioose, or changed parts. Never operate a chain saw that is damaged, improperly adjusted, or is not completely and securely assembled. Be sure that the saw chain stops moving when the throttle control trigger is released.

11.All chain saw service, other than the items listed in the Operator’s Manual, should be performed by competent chain saw service personnel. (e.g., if improper tools are used to remove the flywheel, or if an improper tool is used to hold the flywheel in order to remove the clutch, structural damage to the flywheel could occur which could subsequently cause the flywheel to disintegrate).

12.Always shut off the engine before setting it down.

13.Use extreme caution when cutting small size brush and saplings because slender material may catch the saw chain and be whipped toward you or pull you off balance.

14.When cutting a limb that is under tension, be alert for spring back so that you will not be struck when the tension in the wood fibers is released.

15.Keep the handles dry, clean and free of oil or fuel mixture.

6

Page 5 Page 7
Page 6
Image 6
Zenoah G310TS, G300TS manual For safe operation
Page 5 Page 7

G300TS, G310TS specifications

The Zenoah G310TS and G300TS are two highly regarded professional-grade chainsaws that reflect the company’s commitment to performance, efficiency, and durability. Designed primarily for arborists, landscapers, and serious outdoor enthusiasts, these models are engineered to handle a wide range of tasks including tree trimming, felling, and firewood cutting.

One of the standout features of the Zenoah G310TS is its powerful 30.5 cc engine, which combines performance with a lightweight design. This particular model incorporates a sophisticated digital ignition system that ensures quick starting and reliable performance, even in challenging conditions. Additionally, the G310TS boasts an impressive power-to-weight ratio, enabling users to maneuver easily and operate for extended periods without unnecessary fatigue.

On the other hand, the G300TS, with its slightly smaller 29.5 cc engine, is also designed with efficiency in mind. The engine technology in both models is based on advanced two-stroke technology, which maximizes combustion efficiency, resulting in lower emissions and better fuel economy. This eco-friendly feature is particularly appealing to those who are conscious of their environmental footprint.

Both chainsaws feature automatic chain lubrication systems that deliver consistent oil to the chain and bar, ensuring optimal performance and reducing wear and tear. This is complemented by an easy-access air filter that enhances maintenance procedures, allowing users to keep their equipment running smoothly with minimal effort.

Another critical aspect of the Zenoah G310TS and G300TS is their ergonomic design. These models come equipped with anti-vibration technology that reduces user fatigue, allowing for comfortable handling during prolonged use. The lightweight construction combined with a well-balanced design makes them highly maneuverable, even in tight spaces.

Safety is a paramount consideration in the design of these chainsaws. Both models are equipped with safety features such as inertia chain brakes, protective guards, and safety throttle triggers which help prevent accidental start-ups and ensure a secure operating experience.

In summary, the Zenoah G310TS and G300TS chainsaws are exceptional tools that merge power, efficiency, and user comfort. With innovative technologies and features that prioritize performance and safety, these models are reliable choices for professionals looking to tackle demanding tasks while minimizing operator fatigue and environmental impact.
Top Page Image Contents