G6200

9. Troubleshooting Guide

Case 1. Starting failure

WARNING

• Make sure the icing prevention system is not working.

Check fuel for water

a

fuel.Replace with proper

or substandard mix-

ture.

 

 

 

 

 

Case 3. Oil does not come out

Check oil for sub-

a

Replace.

standard quality.

 

 

 

d

 

 

Check oil passage

 

 

a

Clean.

and ports for clog-

ging.

 

 

 

 

G B

d

Check for engine flooding.

d

Check spark ignition.

a

a

Remove and dry the spark plug.

Then pull the starter again with no choke.

Replace with a new plug.

If the unit seems to need further service, please consult with an authorized service shop in your area.

Case 2. Lack of power/Poor acceleration/

Rough idling

 

 

 

 

Check fuel for water

 

 

 

 

a

fuel.Replace with proper

 

 

or substandard mix-

 

 

ture.

 

 

 

 

 

 

 

 

 

 

 

 

 

d

 

 

 

 

Check air filter and

a

 

 

 

Clean.

 

 

fuel filter for clog-

 

 

ging.

 

 

 

10. Disposal

 

 

 

 

 

 

 

d

 

 

 

Check carburetor

 

 

 

 

 

 

a

Readjust speed

 

When disposing your machine, fuel or oil for the ma-

for inadequate ad-

 

needles.

 

chine, be sure to allow your local regulations.

justment.

 

 

 

 

 

 

 

 

 

11. Specifications

Power unit:

 

 

 

Cutting head:

 

Displacement (cm3):

62.0

Guide bar

 

 

 

 

 

Type:

Sprocket nose

Fuel:

Mixture (Gasoline 50 : Two-cycle oil 1)

Size (in. (mm)):

16 (400), 18 (450), 20 (500)

(when using ZENOAH genuine oil)

Saw chain

 

Fuel tank capacity (cm3):

670

Type:

Oregon 73LGX

Chain oil:

 

Motor oil SAE# 10W-30

Pitch (in. (mm)):

0.375 (9.53)

Oil tank capacity (cm3):

350

Gauge (in. (mm)):

0.058 (1.47)

Carburetor:

 

Walbro HDA type

Power (kw/min-1)

2.89/9,500

ignition system:

 

Pointless (CDl)

Max speed (min-1)

11,000

Spark plug:

 

NGK BPMR7A

Idle speed (min-1)

2,500

Oil feeding system:

Automatic pump with adjuster

 

 

Sprocket (Teeth x Pitch):

................................

7T x 3/8

Specifications are subject to change without notice.

Dimensions (L x W x H) (mm):

435 x 260 x 290

 

 

Dry weight

 

 

 

 

 

Power unit only (kg):

5.6

 

 

GB-15

Page 15
Image 15
Zenoah G6200 owner manual Troubleshooting Guide, Disposal, Specifications