HB2302 / HBZ2602
2. Specification
| Model |
| HB2302 | HBZ2602 |
|
|
|
|
|
| Dimesion (L x W x H) ** |
| 327 x 225 x 360 | 327 x 269 x 360 |
| Dry weight* | kg | 3.9 | 4.2 |
| Fuel tank capacity | liter | 0.75 | 0.65 |
| Engine Type |
| Air cooled | |
|
| |||
|
|
| ||
|
|
|
|
|
| Displacement | cm3 | 22.5 | 25.4 |
| Air filter |
| Dry polyurethane foam | |
| Carburetor |
| Diaphragm, rotary valve type | |
| Ignition system |
| T.C.I. | C.D.I. |
| Spark plug |
| Champion RCJ6Y | NGK CMR7H |
| Muffler |
| Spark arrester equipped | |
| Operating Engine Speed | rpm | 2300 to 7600 | 2800 to 7600 |
| Fuel consumption | liter/h | 0.80 | 0.58 |
| Air Volume* | cu.m/min. | 10 | 10 |
| Max. Air Velocity* | m/sec. | 55 | 55 |
*with standard pipe ** without pipe Specifications are subject to change without notice.
3. Warning labels on the machine
Keep all children, bystanders and help- ers 15meters away from the machine.
(1)Read owner's manual before operating this machine.
(2)Wear head, eye and ear protection.
(3)Handling this machine improperly could result in accidents caus- ingserious injury or death. Read this manual carefully and prac- tice using the blower until you are fully acquainted with all op- erations and have learned to use it correctly.
(4)Severing of fingers or hand by fan blade
Do not open or remove safety guards or nets while engine is running.
(5)Thrown or blown object
Stay a safe distance from the machine.
(6)Hot surface
Avoid contact the hot surface during and immediately operation.
If warning label peels off or becomes soiled and impossible to read, you should contact the dealer from which you purchased the product to order new labels and affix them in the required location(s).
Never modify your machine.
We won’t warrant the machine, if you use the remodeled blower or if you don’t observe the proper usage written in the manual.
4. Symbols on the machine
For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications, please be careful not to make a mistake.
The port to refuel the “MIX GASOLINE”
Position: FUEL TANK CAP
The direction to close the choke
Position: AIR CLEANER
The direction to open the choke
Position: AIR CLEANER
The direction to the start of ignition switch Position: IGNITION SWITCH ON THE CON-
TROL HANDLE
The direction to stop the engine
Position: IGNITION SWITCH ON THE CON-
TROL HANDLE
