10. Troubleshooting guide
Case 1. Starting failure
CHECK PROBABLE CAUSES ACTION
fuel tank ➞incorrect fuel ➞drain it and with correct fuel
fuel filter ➞fuel filter is clogged ➞clean
carburetor adjustment screw ➞out of normal range ➞adjust to normal range
sparking (no spark) ➞spark plug is fouled/wet ➞clean/dry
➞plug gap is incorrect ➞correct (GAP: 0.6~0.7mm)
spark plug ➞disconnected ➞retighten
Case 2. Engine starts but does not keep running/Hard re-starting.
CHECK PROBABLE CAUSES ACTION
fuel tank ➞incorrect fuel or staled fuel ➞drain it and with correct fuel
carburetor adjustment screw
➞out of normal range ➞adjust to normal range
muffler,cylinder (exhaust port)
➞carbon is built-up ➞wipe away
air cleaner ➞clogged with dust ➞wash
cylinder fin, fan cover ➞clogged with dust ➞clean
When your unit seems to need further service, please consult with our RedMax service shop in your area.
9. Storage• Oil the blade to prevent rust.
• Empty the fuel tank and put the cap back on.
• Remove the spark plug, pour a small amount of
oil into the cylinder.
• Rotate the crankshaft several times using the
starting rope in order to distribute the oil. Put the
spark plug back in.
• Wrap the engine with a plastic sheet.
• Store the trimmer in a dry place, preferably not
in direct contact with the floor and away from
heat sources.
❲
24
❳