9. Maintenance
MA7
MA8
Place your file on the cutter and push straight forward. Keep the file position as illustrated. (MA6)
After every cutter has been set, check the depth gauge and file it to the proper level as illustrated. (MA7)
WARNING
Be sure to round off the front edge to reduce the chance of kickback or
(1)Appropriate gauge checker
(2)Make the shoulder round
(3)Depth gauge standard
Make sure every cutter has the same length and edge angles as illustrated. (MA8)
(4)Cutter length
(5)Filing angle
(6)Side plate angle
(7)Top plate cutting angle
24
