INSTALLATION
SPECIFICATIONS
Tornado 2 unit (AK 8200 SS)
10"
INSTALLATION
INSTALLATION
Mounting the Range Hood
1. | Determine and mark the mounting |
|
|
|
| position of the range hood with a pencil. |
| Ductwork connection |
|
2. | Cut out the opening where the range |
|
|
|
| hood will be installed. |
|
|
|
3. | Cut out wall or ceiling area for clearance |
|
|
|
| of ductwork. Install ductwork prior to |
|
|
|
| range hood. |
|
|
|
4. | Determine location for the power |
|
|
|
| supply cable. After drilling access hole, |
|
|
|
| rout the cable into the electrical box |
|
|
|
| of the range hood. Secure with a cable |
|
|
|
| lock and connect to range hood |
| Power supply cable | Screw in place |
| electrical system. | Locking device | ||
|
|
Entry into range hood
5.Position range hood into location and ensure spring loaded catch has locked into position.
6.Fasten wood screws into wood frame opening
8"
2"
1/2"Elec. K.O.
ELECTRICAL
WARNING
All Electrical work must by performed by qualified electrician or person with similar technical know how and background.
For personal safety, remove house fuse or open circuit breaker before beginning installation. Do not use extension cord or adapter plug with this appliance.
Follow National electrical codes or prevailing local codes and ordinances.
C/L
cut out dimension
= cutout dimension
Models: AK 8100 SS, AK 8200 SS Page 4
Electrical Supply:
This appliance requires a 120V 60Hz electrical supply., and connected to an individual, properly grounded branch circuit, protected by a 15 or 20 ampere circuit breaker or time delay fuse. Wiring must be 2 wire w/ ground. Please also refer Electrical Diagram labeled on product.
Cable Lock:
A cable locking connector (not supplied) might also required by local codes. Check with local requirements and codes, purchase and install appropriate connector if necessary.
Cable Lock
Models: AK 8100 SS, AK 8200 SS Page 5