www.zephyronline.com
c.Install a 8” exhaust duct and extend length = S - 16“ 5/8 from ceiling. Duct shall be securely fastened to
joists. Do not use duct smaller than specified. Attention: Duct installation is not required for non- vented (recirculating) installations
d.Install 1/2" electrical conduit in location marked on template and extend length = S - 11“ 1/8 from ceiling.
Note: If a Remote ventilator installation is required/ needed, then provide an additional hole/conduit.
e.Install drywall around duct and conduit; then refinish ceiling, leave enough clearance for easy installation of chimney structure up to ceiling (see Installation step 6).
f.Tape Template in place and fit 4 screws on mounting holes, do not tighten but leave a space of 1/2“, remove the template.
3.Regulate chimney structure according dimension S (see step 1) and fix all assembly parts with 4 screws to each bracket (32 screws in total - 8 already in place , 24 to be screwed in), check structure is well assembled.
5
11
Gv8FRONT76342"1Total 8 x 4 screws