8. Elect

WARNING

Electrical Haza Warning:

before unit 120

THIS

NO

rical

remove the left cover and install the

listed) in junction box.

knockout

3white and green ,according to the Code and local codes and conduit from service panel to

Connect black wire from service panel to black or red in junction box, white to white and green to green-yellow.

Close junction box cover.

9.Note: disregard this step if the hood has been fitted with an integralventilator.

Purchase and install a Remote ventilator (see paragraph „Before installing the hood - Parts not supplied“ for model reference).

10.For non-vented (recirculating) installations ONLY: Install one charcoal filter.

11.Assemble the canopy with the integral ventilator housing (chimney structure):

a.Remove the grease filter (see also Care & Use section - Charcoal filter).

b.Thread completely the lower part of the hood onto the integral ventilator housing rails. Note: control panel on canopy and electronic box on chimney structure should be on the same side.

c.Make alla cable connections: