MOUNTING THE DUCT COVER
1.Unclip the top cover. Fig.1
2.Unscrew and remove the four clips on the hood Fig. 2
3.Position the chimneys on the hood as described in fig.3 and fasten the parts using the (4) screws provided.
4.Place correct size ducting for your installation (not supplied) to the hood and secure to the blower collar with aluminum duct tape. Fig. 4
5.Secure duct cover bracket to top of wall just below the ceiling observing the distance shown in Fig.5, and using (2) screws provided. See Fig.6
6.Extend top duct cover up and secure to the duct cover bracket using (2) screws. See Fig. 7
Installation - Mounting the Duct Cover
- 3 -
