Advanced Setup
74 6211-I2 ADSL2+ Router User’s Guide 6 211-A2-ZB21-60
zBitswap Enable
zSRA (Seamless Rate Adaptation) Enable
Do not change these settings unless so directed by your ISP.
DSL Advanced Settings
Do not change the DSL Advanced Settings unless so directed by your ISP. To
view the DSL Advanced Settings screen, click on the Advanced Settings
button on the DSL Settings screen (see Figure64).
There are five test modes between the router and your ISP:
zNormal test: Puts the router in a test mode in which it only sends a
Normal signal.
zReverb test: Puts the router in a test mode in which it only sends a Reverb
signal.
zMedley test: Puts the router in a test m ode in which it only sends a
Medley signal.
zNo Retrain: In this mode the router will try to establish a connection as in
normal mode, but once the connection is up it will not retrain if the signal
is lost.
zL3: Puts the router into the L3 powe r state.
Figure 65: DSL Advanced Settings