Installation
ZX4300P Series LED Reference Key
LED | Color | Function | Power up Display |
LNK | Green | ON indicates a link is established | OFF during power up. |
|
| with the corresponding port. |
|
ACT | Yellow | Flashing indicates activity on the | OFF during power up. |
|
| channel. |
|
|
|
|
|
SPD100 | Green | ON indicates the ethernet channel | OFF during power up. OFF |
| is successfully linked at 100 Mb/s | linked at 10Mb/s | |
RESET |
| Pressing RESET runs a lamp test to |
|
|
| ensure all switch LEDs are |
|
|
| operating and restarts the adapter. |
|
POWER | Green | ON indicates the power source is | ON during power up. |
|
| active. |
|
REAR | Green | ON indicates continuity with the | ON during power up, if RTB |
PANEL |
| Rear Transition Board | installed. |
|
|
|
|
HOTSWAP | Blue | After the extraction levers are | OFF during power up. |
|
| released (pulled apart), ON |
|
|
| indicates the switch unit is ready to |
|
|
| remove. |
|
|
| During “hot” insertion (system is |
|
|
| active), HotSwap LED is ON and |
|
|
| turns OFF when the switch is |
|
|
| correctly seated. |
|
ZX4300P Series User's Guide | Page 6 |