802.11g Wireless Network Adapter
14
This chapter provides solutions to problems that may occur during the installation and
operation of ZEW1505/ZEW1605/ZEW1605A. Read the descriptions below to solve your
problems.
1. ZEW1505/ZEW1605/ZEW1605A does not work properly.
Reinsert ZEW1505/ZEW1605/ZEW1605A into your PC’s PCI /Cardbus slot.
Right click on My Computer and select Properties. Select the device manager and click on
the Network Adapter. You will find the Adapter if it is installed successfully. If you see the
yellow exclamation mark, the resources are conflicting. You will see the status of the
Adapter. If there is a yellow question mark, please check the following:
Make sure that your PC has a free IRQ (Interrupt ReQuest, a hardware interrupt on a PC.)
Make sure that you have inserted the right adapter and installed the proper driver. If the
Adapter does not function after attempting the above steps, remove the adapter and do the
following:
Uninstall the driver software from your PC.
Restart your PC and repeat the hardware and software installation as specified in this User
Manual.
2. I cannot communicate with the other computers linked via Ethernet in the
Infrastructure configuration.
Make sure that the PC to which ZEW1505/ZEW1605/ZEW1605A is associated is powered
on.
Make sure that ZEW1505/ZEW1605/ZEW1605A is configured on the same channel and with
the same security options as with the other computers in the Infrastructure configuration.
3. What should I do when the computer with ZEW1505/ZEW1605/ZEW1605A
installed is unable to connect to the wireless network and/or the Internet?
Check that the LED indicators for the broadband modem are indicating normal activity. If
not, there may be a problem with the broadband connection.
Check that the LED indicators on the wireless router are functioning properly. If not, check
that the AC power and Ethernet cables are firmly connected.
Check that the IP address, subnet mask, gateway, and DNS settings are correctly entered
for the network.