2.4 Hardware Connection
Note: Before connecting ZEW3003, be sure to power off your computer, DSL/Cable modem, and ZEW3003. To achieve maximum wireless coverage, tilt ZEW3003’s antenna outward at 45° angle.
1.Connect one end of the cable to your broadband router, PC or Switch/Hub port and connect the other end to the LAN port of ZEW3003.
2.Power on ZEW3003 by connecting one end of the supplied power adapter to the power jack of ZEW3003 and connecting the other end to an electrical outlet.
3.Power on your wireless device.
4.Make sure the LEDs of ZEW3003 are lit. If not, try the above steps again, or jump to “Troubleshooting” for possible reasons and solution
5
