2In the Privacy Configuration window, click the Authentication Mode drop-down arrow and select Open.

The USB Adapter automatically selects WEP as the Encryption Mode.

3In the Preconfigured key [WEP] area, do the following:

aIn the Format for entering key list, select

•ASCII characters if your network uses all Zoom wireless products

•Hexadecimal digits if an access point, router, or some adapters are not Zoom products

bIn the Key Length drop-down list, select 64 bits.

cIn the Key Index drop-down list, select which of four keys

– 1, 2, 3, or 4 – will be used to encrypt the data. The key you select must be the same one that is selected on the access point. We recommend that you use Key 1.

dIn the Network Key text box, enter a key.

•If you selected ASCII format, enter 5 characters. The characters can be any upper- or lower-case letters and numbers.

•If you selected Hexadecimal format, enter 10 characters. Each character can be any of the following: 0 1 2 3 4 5 6 7 8 9 A B C D E F

The network key must be the same for all the devices on your network.

eRe-enter the key in the Confirm Network Key text box.

4