Effect Types and Parameters
ZOOM A2.1u
37
CONTROL

CONTROL module

Serves for making built-in expression pedal settings and lets you control the foot switch
function and master level setting applying to all patches.
Ct
CONTROL
RTM DESTINATION
See Table 3
FS
See Table 4
MASTER
LEVEL
0 – 98, 1.0
Selects the modulation target module
that is controlled with the built-in
expression pedal (see Table 3).
When a foot switch (FS01) is connected
to the [CONTROL IN] jack, this selects
the function that can be operated with
the foot switch (see Table 4). The
function selected here applies to all
patches.
Adjusts the master level for all patches.
[Table 3] [Table 4]
Setting Modulation target Setting FunctionoF
OFF
bP
Bypass/Mute
vL
Volume
tP
Tap tempo
CU, Cd, CH, CL
COMP/LIMIT module (*)
bU
Bank up
tU, td, tH, tL
TONE parameter of MODEL module (*)
rH
Rhythm function on/off
EU, Ed, EH, EL
MOD/EFX module (*)
dH
Delay hold
dU, dd, dH, dL
DELAY/REVERB module (*)
dM
Delay input mute
Fb
Frequency of feedback control function.
Mn
Manual mode on/off
Fb
Feedback control function on/off
CT
"UP"
Maximum value
Minimum value
Maximum value
Maximum value
V
alue set in patch
V
alue set in patch
Minimum value
Minimum value
"DOWN""HIGH""LOW"

The operation of modules denoted by (*) changes as follows,

according to the letter at right.

UP

The parameter is at minimum when the pedal is fully raised and

at maximum when the pedal is fully pushed down.

DOWN

The parameter is at maximum when the pedal is fully raised and

at minimum when the pedal is fully pushed down.

HIGH

When the pedal is fully raised, the parameter is at the value set in

the patch. When the pedal is fully pushed down, the parameter is

at maximum.

LOW

When the pedal is fully raised, the parameter is at minimum.

When the pedal is fully pushed down, the parameter is at the

value set in the patch.

U

D

H

L

eA21u.fm 37ページ ２００５年１１月４日　金曜日　午後５時２３分