Using the FIRE-15

4. To store the patch, press the [STORE] key once more.

The store process is carried out, and the unit goes into program mode.

HINT

By calling up an existing patch and then selecting another destination for the store process, copying a patch is possible.

Using the built-in tuner

The FIRE-15 incorporates an auto-chromatic tuner which can be activated by pressing the [TUNER] key.

1. Press the [TUNER] key in the patch section.

The LED of the key lights up and the internal tuner becomes active.

If you want to tune while keeping the sound output on, press the [TUNER] key only briefly. (The display indication shows "tU".) If you want to tune while the sound is muted, hold down the [TUNER] key somewhat longer. (Release the key when the display indication shows "Mt".)

T

Mute

Hold down MT

2. Play the open string you want to tune

The left side of the display shows the note which is closest to the current pitch. The right side of the display shows how far the pitch is off. Adjust the pitch while observing the display.

Pitch is sharp Correct pitch Pitch is flat

A8 A8

The higher the rotation speed, the more the pitch is off.

3. To change the tuner reference pitch, press one of the [Q]/[W] keys.

The current reference pitch is shown for two seconds. The default setting is "40" (center A = 440 Hz).

ZOOM FIRE-15

13