Zoom 3095, H08-15356 quick start Loading the Firmware Files Using HyperTerminal

10/16/2008 vF1-05-72

Firmware Patch Version F1-05-72 for USB Mini Modem

This Firmware Patch is only for the following modem models:

•Zoom V.92 USB Mini External, Model 3095

•Hayes Accura V.92 USB Mini External, Model H08-15356

How to Apply the Firmware Patch

This Firmware Patch is a 2-file process. These files must be loaded using a terminal emulation program that can communicate with modems/serial ports and transfer ASCII or text files. The port settings in the program must be configured to a baud rate (port speed) between 9600 and 115200 bps and hardware flow control (RTS/CTS) enabled.

Below are steps for loading the firmware files using HyperTerminal, which is included with Windows 95 through XP. These instructions assume you have installed the modem using the Zoom or Hayes drivers, depending on which modem model you have. Refer to the modem’s Quick Start or User Guide if necessary. The driver installation automatically configures the port settings.

Windows Vista users will need to use a third-party terminal emulation program, such as the freeware TeraTerm Pro Web by Ayera Technologies (http://www.ayera.com).

Loading the Firmware Files Using HyperTerminal

1From the Start menu, select All Programs (or Programs) → Accessories → Communications → HyperTerminal and open the HyperTerminal (or Hypertrm.exe) application.

Note: If HyperTerminal is not installed on your computer, from the Start menu, go to Control Panel (or Settings → Control Panel), open Add/Remove Programs, and click the Windows Setup tab. Select Communications and click the Details button. Select HyperTerminal and click OK, then Apply. You may be asked to insert your Windows installation disk.

2When the Connection Description window appears, enter any description (e.g., “test”) in the Name field, accept the default icon, and click Next.

3On the Connect To window, enter any number (e.g., “123”) in the Area Code and Phone Number fields, select USB Modem from the Connect using drop-down menu, and click Next.

4On the Connect window, click Cancel.

5On the white screen with a blinking cursor, type AT&F (even if the command characters are not echoed on screen) and press Enter. The modem should respond OK.

Note: The command characters are not case sensitive.

6Type AT** and wait for the Download initiated .. response.

7From the Transfer menu (top of the screen), select Send Text File.