INTERNATIONAL MODEL NUMBER: BU801E/D
CLOSING THE STROLLER FOR
TRAVEL OR STORAGE
Each time, before closing your stroller, check the following:
Your child is clear of moving parts
The rear brakes have been set
The backrest is in the full, upright position
The front wheels are secure in the locked mode
The canopy is retractedFig.10
All items have been removed from the basket
Never attempt to fold or close your Zooper with your
Child inside
First release the primary lock by lifting the foot block up with your foot (Fig 10). Then lift up on the secondary lock tab, just above the foot block, to release the frame (Fig 11). Push the handles forward and collapse the stroller down into the folded position(Fig 12) Attach the frame lock(Fig 13).
Fig.11
Fig.12
Fig.13
6
INTERNATIONAL MODEL NUMBER: BU801E/D
USING THE BRAKES
To engage the brakes, step down on break lever, (Fig.8). The brake lever should be facing out. Always check that the brakes have fully engaged by pushing forward on the stroller to make sure it stays in place. Lift the brake lever with your foot to release the brakes.
!WARNING: Always engage the brakes when you are not holding onto the stroller and check that The brakes have been properly engaged as
described above. Always engage the brakes when | Fig.8 |
putting your child in, or taking your child out, of the |
|
stroller. |
|
SWIVEL WHEELS
The
Fig.9
5
User Guide Salsa BU801E/D
!WARNINGS
IMPORTANT CARE AND SAFETY INFORMATION
Avoid serious injury from falling or sliding out, always use safety harness provided.
This stroller is designed for a child six months of age until the child weighs 40 lbs.
INTERNATIONAL MODEL NUMBER: BU801E/D
IMPORTANT: READ THESE SAFETY INSTRUCTIONS CAREFULLY BEFORE USING YOUR STROLLER AND KEEP THEM FOR FUTURE REFERENCE. THE SAFETY OF YOUR CHILD DEPENDS ON IT.
INTERNATIONAL MODEL NUMBER: BU801E/D
REAR WHEELS
To install the rear wheels, line up each wheel block
INTERNATIONAL MODEL NUMBER: BU801E/D
ADJUSTING THE SEATBACK
To lower the backrest, unsnap the straps from the
This stroller is not suitable for use with newborns.
This stroller is not compatible with any infant car seat carriers.
Always engage both rear brakes when not holding onto your stroller.
Never leave your child unattended.
Never use the stroller near an open fire or exposed flame.
C B D
Never allow the stroller to be used as a toy.
Never allow more than one child at a time in the stroller.
Never hang bags or other items from the handle or on the canopy. This may cause the stroller to become unstable.
Never use the stroller on stairs or escalators.
Do not overload the basket. Maximum load is 7 lbs. Excessive weight may cause a hazardous unstable condition to exist.
This stroller is not recommended for use with a child over 40 lbs.
Thank you for choosing Zooper.
UNLOCKING & OPENING THE FRAME
We recommend you choose a good floor surface. Your Zooper has a strong metal frame that could scratch
hardwood floors or other sensitive surfaces. To open the
frame, first pull back on the frame lock which connects the rear leg to the handle (Fig. 1). Grasp the handle and pull back and up so that the stroller frame opens (Fig. 2). Step down on the foot block while pulling back on the handle so that the frame snaps open (Fig. 3).
Fig.1
with each rear leg tube (Fig. 5). The brake levers must be facing out, away from the stroller. Locate the spring lock buttons on the outside of the rear leg tubes. Make sure the buttons are coming out of the button holes and have not slipped inside the tube during shipping. If you are missing a spring lock, please contact the appropriate service center listed at the back of these instructions for replacement parts. Push the rear wheel block onto the rear frame leg until it clicks onto the spring lock button. Then repeat for the other wheel block. Check visually that the buttons have popped out of the small holes on the outside of the wheel assembly. Pull out on each wheel black to make sure that it has locked into place.
Fig.5
frame at the top of the seat. To raise the backrest, push up on the back of the seat until it is upright and
!WARNING : Always keep your child in sight when making these kinds of adjustments. Check the fitting of the safety harness each time the backrest is adjusted to be sure a snug, yet comfortable fitting is maintained.
Shoulders
Straps
A C B D
Fig.7
This stroller is designed as a walking stroller. We do not recommend running, roller blading, or other such activities with this stroller.
This stroller is a single stroller, do not use any attachments that allow for a second child.
It may be unsafe to use accessories other than those approved by the manufacturer or distributor.
MAINTENANCE
! WARNING: Be sure children are at a safe |
|
distance and cannot reach moving parts whenever |
|
opening or closing the stroller. Do not open the frame |
|
by stepping down on the brake lever as this may result |
|
in damage to your Zooper. Always step down on the | Fig.2 |
foot block to open the stroller.Always make sure the |
|
stroller has been opened fully by checking to see that |
|
the metal bars connecting the foot block to the frame |
|
are straight and parallel to the ground. |
|
!WARNING: Do not use this stroller if the buttons do not properly pop out and lock the rear wheels in place. Contact the appropriate service center listed at the back of these instructions for replacement parts.
SCREW AND NUT
Do not fold your stroller when wet.
Machine wash removable seat and armrest covers using gentle cycle, cold water, and a mild detergent. Do not use bleach. The canopy can only be spot washed.
Do not use dryer to dry fabric parts.
Do not leave your stroller in direct sunlight for extended periods of time.
Clean and lubricate all moving parts on the stroller frame and wheels as needed.
Use only a penetrating silicon based lubricant.
Regularly check for loose screws, broken parts, etc. Use only Zooper approved replacement parts available through the service centers listed below.
Wipe off any sand, salt or other corrosive residue after each use where the stroller may be exposed to those elements.
In order to maintain the highest quality standards, the distributor reserves the right to improve or alter any Zooper stroller design without notice or obligation to any previous purchaser. For questions or service needs, please contact the service center located in your country of residence. Sending in your warrantee card will help expedite any service needs.
1
FRONT WHEEL BLOCKS |
|
|
|
Line up each front wheel block with the front leg and | Fig.3 |
push firmly together (Fig 4). Always check to see that |
|
the wheels have been properly installed by pulling out |
|
on the wheel block. It should be locked to the front leg. |
|
To remove, push in on the looped metal retention clip |
|
located on the underside of the wheel block, and pull |
|
the wheel block off. |
|
|
|
| Fig.4 |
|
|
2
CANOPY
The canopy attaches onto the stroller frame above each the plastic hinge on each side (Fig. 6). Push firmly to install. Open the canopy by pushing down on the plastic side canopy braces. Retract the canopy by first pulling up on the side braces then pushing the canopy hood back.
!WARNING: Do not try to retract the canopy when the side canopy braces are fully open or with
the sun visor extended. This may damage the | Fig.6 |
canopy. |
|
3
SAFETY HARNESS
Zooper provides a special
!WARNING: Avoid serious injury or death from falling or sliding out. ALWAYS use the seat belt. NEVER leave your child unattended.
4
