Expert Loading Directions
Only for individuals certified by the ASI (ATV Safety Institute)
By using directions in this section, you are agreeing that you are an ASI trained, certified rider
and that you understand that your safety in performing this procedure is
based on your ability to control the vehicle.
1.Have an assistant monitor the Ramp tongue for slippage on the tailgate.
2.Confirm that the weight of the ATV and rider combined is still less than the 1500 lb. capacity of this ramp.
3.While wearing a safety helmet, drive your ATV onto ramp at less than 1 Mile Per Hour using the lowest gear possible. Drive up at a slow, steady speed while leaning forward on the front pegs to keep proper balance. Try to avoid bouncing or jerking, because they will increase stress on the ramp.
WARNING! Be sure the
4.Once the load is in truck bed, be sure to set the ATV’s brake & securely tie down ATV. Remove the ramp, fold it up and secure it with the Safety Chains and Hooks.
CAUTION! Contact between the tongue of the ramp and the tailgate of the vehicle may result in damage to the vehicle’s body finish.
CAUTION! WHENEVER possible, use a winch (not included) to load the ATV. This is the safest way to load an ATV.
Page 6 | For technical questions, please call | Item 90018 |
