7Install the Printer Software
Windows®
1Make sure your printer is connected and turned off. Then turn on your computer and wait for Windows to start up.
2Press the power button to turn on your printer.
If you see a New Hardware screen, click Cancel.
3Insert the printer software
4When you see the Software License Agreement, read it and click Agree.
5 Click Install Printer Driver and wait while the printer software is installed.
NOTE: If you see a screen about turning on the printer, make sure the printer is connected and turned on and wait for the computer to detect the printer port.
6At the end of the driver installation, click OK.
7Follow the
8Click Install GretagMacbeth Software to try the
program and install it if desired. When you finish,
click Back.
9Select Install Reference Guide to install the printer manual on your desktop.
10Select Share Photos Online at Epson PhotoCenter, then click Add Icon to place a link to the web site on your desktop.
11Click Exit. Register your printer with Epson® as instructed. Remove the
Macintosh®
1Make sure your printer is connected and turned on. Then turn on your Macintosh.
2Insert your printer software
3
4Read the License Agreement and click Agree.
5 Click Install Printer Driver and follow the
6Click Install GretagMacbeth Software to try the program and install it if desired. When you finish,
click Back.
7Select Install Reference Guide to install the printer manual on your desktop.
8Select Share Photos Online at Epson PhotoCenter, then click Add Icon to place a link to the web site on your desktop.
9Click Exit. Register your printer with Epson as instructed. Remove the
10Now add the printer to the Printer Setup Utility or Print Center as described in the next section.