Epson PowerLite 835p

Note: The image will be slightly smaller after adjusting. If it’s important to maintain the correct aspect ratio, use the menu system to perform keystone correction, then use the remote’s Resize button to adjust the aspect ratio.

Keystone buttons

❏Press the Menu button on the remote control, select the Setting menu, and press Enter. From the Setting menu, select Keystone and press Enter, select H/V Keystone and press Enter, then select Horiz./Vert./Height and press Enter. Select V-Keystone (for vertical keystone distortion) or H-

Keystone (for horizontal keystone distortion) and press Enter. Use the pointer button on the remote control to adjust the keystone setting as needed.

Using Quick Corner

If your projected image has no parallel sides, you can even up the sides using Quick Corner. Follow these steps:

1.Press the Menu button on the remote control (or on the projector’s control panel).

2.Select the Setting menu and press Enter.

Note: If you are already using Keystone settings, you see a warning message. To disable keystone settings and use Quick Corner instead, press Enter; to keep your settings, press Esc.

3.From the Setting menu, select Keystone and press Enter.

4.Select Quick Corner and press Enter. You see this screen:

5.Press the Enter button to select the corner you want to adjust.

6.Use the pointer button on the remote control (or the arrow buttons on the projector) to adjust the shape.

Note: If you are not satisfied with the corrections made, press the Esc button for one second to reset the screen to its original shape.

7.Repeat steps 5 and 6 as needed to adjust any remaining corners.

8.When you’re done, press the Esc button on the remote control or projector’s control panel to exit the menu system.

If Quick Corner remains selected in the Keystone menu, the Quick Corner screen appears whenever you press the projector’s keystone buttons. You can then follow steps 5 through 8 above to correct the shape of your image or press Esc to exit Quick Corner.

Correcting Computer Images

If you’re connected to a computer and the image doesn’t look right, press the Auto button on the remote control.

Note: You must be projecting an image for this button to have any effect. The Auto button works only with computer images.

8 - Epson PowerLite 835p

10/04