Prestige 660RU Series Quick Start Guide

Hardware Connections

1.Connect the Prestige to a telephone jack using a telephone wire.

2.Use an Ethernet cable to connect a computer to the LAN 10/100M port for initial configuration and/or Internet access.

3.If you have a USB-enabled computer that does not have a network interface card for attaching to your Ethernet network, connect the computer to the USB port with a USB cable. Refer to the Installing the USB Driver section.

4.Connect to a power source using the included power adaptor.

5.After you’ve made the connections, connect the power adaptor to a power supply and push in the power button to turn on the Prestige. Look at the front panel LEDs.

Check Front Panel LEDs

When the Prestige is turned on, the PWR/SYS LED and USB LEDs blink while performing system testing. The PWR/SYS LED then turns steady on if the testing is

3