ZyXEL Communications A-6000 System Configuration Description, Wireless Configuration Description

A-6000 High Speed, Long Range Ethernet Wireless Bridge

To update configuration files:

1.Enter the configuration updates or changes in the appropriate configuration fields.

2.Click Update. After click Update, there will appear red string alarm to let you press the REBOOT BU to reboot system to make the changes effective.

3.Click Reboot BU to make the changes effective.

The web server loses connectivity with the Web Server as the BU reboots. To reestablish the connection with the Web Server, wait until the BU has completed rebooting and navigate to the Web Server to resume

System Configuration	Description
User Name	Specifies the user name.
Password	Specifies the password.
Telnet Enable	Use the checkbox to allow telneting into the BU.
Access Control	Specifies the RU’s MAC address allowed to join.

Wireless Configuration	Description
SSID	Identification of the BU. Enter a number or
	address between 1 and 32 characters in length
	that the RU is associating with. Use the System
	Name field to uniquely identify each BU..
Country	Display country name; it’s related to channel
	frequency base.
RF Channel Frequency	Select the desired frequency of operation from
	the drop-down menu, or choose SmartSelect.
	The radio frequencies that appear in the Radio
	Channel drop-down menu are dependent on the
	wireless mode selection. Select “SmartSelect” to
	automatically search through the frequency list to
	find a used or less congested channel. It only
	works on AP system. AC will scan the right
	channel.
Data Rate (Mbps)	Specifies rate of data transmission. Select the
	desired rate from the drop-down menu. The Best
	selection will adapt the rate to the best available.
	Value unit in Mega bit per second
Transmit Power	Specifies the level of transmit power. Choose the
	value of the transmit power from the dropdown
	menu. Decrease the transmit power if more than
	one AP is co-located using the same channel
	frequency. Maximum transmit power depends on
	channel frequency. In selected item, ‘Full’ means
	maximum transmit power; ‘Half’ means Full –
	3dB; ‘Quarter’ means Full –6dB; ‘Eighth’ means
	Full –9dB; and ‘Minimum’ means 0dB.
Beacon Interval (20 - 1000)	Specifies the beacon interval value. Enter a value
	between 20 and 1000. It only works on AP
	system.
Data Beacon Rate (1 - 255)	Specifies the Data Beacon Rate. Enter a value
	between 1 and 255 that specifies the delivery
	traffic indication message (DTIM). It only works
	on AP system.
Fragment Length (2346)	Shows the fragment length.
RTS/CTS Threshold (256 - 2346)	Specifies the value of the RTS/CTS threshold.
	Enter a value between 256 and 2346.

Initial Setup 3-5