Chapter 2 Hardware Description and Connection

2.2.3 Front Panel LEDs

The LED Indicators give real-time information about the status of the Switch. The following table provides descriptions of the LEDs.

Figure 5 Front Panel LEDs

ES1100-16

ES1100-24

ES1100-24E

The following table describes the LEDs.

Table 2 The Front Panel LED Descriptions

LED

COLOR

STATUS

DESCRIPTION

PWR

Green

On

The Switch is on and receiving power.

 

 

 

 

 

 

Off

The Switch is not receiving power.

 

 

 

 

LINK/

Green

On

The port is connected to an Ethernet network at 10M or

ACT

 

 

100M speed.

 

 

 

 

 

 

Blinking

The port is receiving or transmitting data.

 

 

(Normal)

 

 

 

 

 

 

 

Blinking

The Ethernet network link is down due to loop detection.

 

 

(Slow)

 

 

 

 

 

 

 

Off

The port is not connected to an Ethernet network.

 

 

 

 

2.3 Hardware Installation

For ES1100-16/24E, you can place the Switch directly on top of your desk or have it rack-mounted. For ES1100-24, the size is suitable for rack-mounting and you can refer to Section 2.3.2 on page 17 for instruction. Take note of the following:

The Switch should have a minimum 25 mm space around it for ventilation.

The Switch should be placed in a desk that has a level surface and that is able to support the weight of the Switch.

To start using it, simply connect the power cables and turn on the Switch.

 

15

ES1100 Series User’s Guide