Chapter 2 Hardware Description and Connection

Note: The ES1100-16/24E is a desktop device, but it is also rackmountable and wall-mountable. Ask an authorized technician to attach the Switch to the rack/wall.

2.3.1 Wall Mounting (ES1100-16 / ES1100-24E Only)

Do the following to attach your Switch to a wall.

1Screw the two screws provided with your Switch into the wall 150 mm apart (see the figure in step 2). Use screws with 6 mm ~ 8 mm (0.24" ~ 0.31") wide heads. Do not screw the screws all the way in to the wall; leave a small gap between the head of the screw and the wall.

The gap must be big enough for the screw heads to slide into the screw slots and the connection cables to run down the back of the Switch.

Note: Make sure the screws are securely fixed to the wall and strong enough to hold the weight of the Switch with the connection cables.

2Align the holes on the back of the Switch with the screws on the wall. Hang the Switch on the screws.

The Switch should be wall-mounted horizontally. The Switch's side panels with ventilation slots should not be facing up or down as this position is less safe.

16

 

ES1100 Series User’s Guide