183. TV Features
Sound Projector
838 Series
The TV’s
Positioning the TV
•Center the seating area in front of the TV and at least six feet away.
•Arrangements that give good results:
•If the room is an odd shape, locate the TV to take best advantage of wall reflections.
•Avoid locations that may distort sound reflections.
3.Place the microphone as described in the guide- lines.
4.Press MENU and go to Sound > AutoSP.
5.Highlight START and press ENTER.
6.Quietly exit the room right away. The calibration sequence may be loud. Wait for completion of setup before returning to the room.
7.Play some sample audio material to check the sound quality.
Note: Do not perform manual adjustments after run- ning auto setup as doing so will delete all auto- setup results.
8.Store the microphone out of direct sunlight and away from heat.
Microphone Placement
Connecting the TV
To hear digital surround sound, the TV must be con- nected to a digital surround sound source. The surround sound source can be on an HDMI input or the ANT input (for some digital broadcasts). Other stereo connections will provide Dolby Pro Logic surround sound.
TV
6 ft. minimum
Microphone
Set the microphone on a level surface at ear height at least six feet from the TV. Use a seat backrest or tripod so as to pick up sound from all directions.
Auto Setup
Auto setup uses the included calibration micro- phone. For manual setup, see the full owner’s guide at
1.Power on the TV and external subwoofer, if any.
2.Plug the microphone cable into the TV’s INPUT 3 left audio jack.
L AUDIO R
For assistance call 1(800)
Height of TV | 3 ft. | Be sure the |
height of the | ||
speakers |
| microphone is |
|
| within three feet |
|
| of the speaker |
|
| height. |
Microphone
Center the micro- phone in front of the TV.